Scirocco Central

Its in the dash. It will rip / break the dash when deployed.

More a last resort thing: Disconnect battery over night. This will give strange errors the first couple of miles, that can be ignored.

Best headline / question ever :-)

Look at xenon retrofit in Roccopedia. You also need to recode using vagcom. You can go back to before xenon, if you keep a copy of the code from before changing parameters. I would just go to MOT, and then revert only if they complain. I have washers but no leveling, and just went through the Danish...

Apples 30pin to lightling adaptor should do the trick.

Post a pic.
Mine piggybagged ón another button.

Basicly it is plus & ground to light the button, and the triggerwire.

http://www.sciroccocentral.co.uk/roccop ... _Bluetooth" onclick="window.open(this.href);return false;

Set wintertire warning to the speed you need. Then you get a beep and text warning in the mfd.

http://www.my-gti.com/1080/volkswagen-s ... ifferences" onclick="window.open(this.href);return false;

Passat uses the same wheels as the Roc.

Just remember to get the four digit code, else its a brick.

See other thread w camera retrofit problems.
It is a lot easier to buy a retrofit kit made specifically for RNS510 & Roc.
Kufatec.de is one option.

Xenon!

The tool for pulling off the black nut-covers looks like a keyring with a one inch rod with a small hook on the end. No torx involved.

Its back to the dealer, and maybe this time say its ok if it a bit high. They tend to set them too low, in a misguided gesture to not blind the oncoming traffic.

The xenon is brighter and reaches farther than standards.

Front looks very Scirocc'ish.
Like the new lights. I think that they are part of the new VW look with square lights front and rear.
The rest of the car is neutral as a Golf needs to be, without being too boring.

All in all, I like it. Still love the Roc more though

Could You post a picture of the part it self.
It is interesting to know if it is for retrofitting, or a spare part only for factory installed camera.

I think it screws in counter-clock wise.

Check Roccopedia and Kufatec.DE to see example on how it works.

All RNS510 should work with the reverse camera.
Have You verified that the 12v cable you fitted from the central control Unit to the RNS actually gives +12v when You select reverse?