Victor

mazzie_baby · Post by **mazzie_baby** » Fri Jun 05, 2015 11:44 pm

I have a serious crush on Victor [emoji4]

Sent from my iPhone using Tapatalk

easyrider · Post by **easyrider** » Mon Jun 08, 2015 10:52 pm

quickshift's reflection.

easyrider · Post by **easyrider** » Mon Jun 08, 2015 11:23 pm

my 2 bucket / quick clean kit. need a harder wax.

easyrider · Post by **easyrider** » Wed Jun 10, 2015 11:35 pm

peterg and i went halves on a vagcom lead which finally arrived today, about time the london rocco crew had one of these. also means the next couple of mini-mods i've been scheming and messing with could happen this weekend!

easyrider · Post by **easyrider** » Thu Jun 11, 2015 3:09 am

maybe did a little bit of practise for this month's black and white photo comp

Jojreynolds · Post by **Jojreynolds** » Thu Jun 11, 2015 5:25 am

easyrider wrote:my 2 bucket / quick clean kit. need a harder wax.

Harder wax than dodo juice? It's pretty much as hard as wax gets isn't it?

Instagram: James.reynolds

Phil · Post by **Phil** » Thu Jun 11, 2015 8:06 am

Jojreynolds wrote:
easyrider wrote:my 2 bucket / quick clean kit. need a harder wax.

Harder wax than dodo juice? It's pretty much as hard as wax gets isn't it?

Instagram: James.reynolds

Dodo juice offer soft and hard wax

Jojreynolds · Post by **Jojreynolds** » Thu Jun 11, 2015 8:41 am

philjay92 wrote:
Jojreynolds wrote:
easyrider wrote:my 2 bucket / quick clean kit. need a harder wax.

Harder wax than dodo juice? It's pretty much as hard as wax gets isn't it?

Instagram: James.reynolds
Dodo juice offer soft and hard wax

Well on that note may I take this opportunity to recommend dodo juices harder wax. Not only is it really easy to work with the end product is also second to none in my opinion. [emoji2]

Instagram: James.reynolds

easyrider · Post by **easyrider** » Thu Jun 11, 2015 10:22 pm

that's really helpful, thanks james. i'll get some dodo hard wax then.

in other news i found a nice tree tunnel:

easyrider · Post by **easyrider** » Sun Jun 14, 2015 2:54 am

somewhere near tunbridge wells:

easyrider · Post by **easyrider** » Sun Jun 14, 2015 3:00 am

then took the long way home at sunset:

Jojreynolds · Post by **Jojreynolds** » Sun Jun 14, 2015 9:29 am

Looking amazing as always

Instagram: James.reynolds

whiteDevil_170 · Post by **whiteDevil_170** » Sun Jun 14, 2015 9:33 am

^^^ what he said!
Cleanest roc on here.

easyrider · Post by **easyrider** » Sun Jun 14, 2015 12:12 pm

thanks boys

easyrider · Post by **easyrider** » Mon Jun 15, 2015 6:03 pm

puddle lights and chrome switches

so vw don’t give you door puddle lights these days it seems so took it upon myself to make and install some blue ones to match the footwells and needles. also really liked the chrome tipped window and boot switches from the facelift rocco so bought a set of those to install while the door cards were off. also got a vagcom lead to activate the puddle lights. here's what happened:

bought three sets of puddle lights off eBay so i could try out different combinations and have spares should something go wrong. about £20 quid per set.

set 1: red and white lenses with white leds pointing to the floor, red side of door
set 2: red and white lenses with blue leds pointing to the floor, red side of door
set 3: clear lenses with white leds floor and side

things i used:
trim removal tools, torx screwdrivers t10, t20, t25 sizes (i think), spare door trim clips, leds, anti rattle tape, soldering stuff, heat proof putty, vagcom, tiny screwdriver for window switch removal

these were converted with soldering, snipping, painting, etc into:
set 1: as they were; red sides, white bottom
set 2: black and white lenses with blacked out door sides and blue led shining on floor
set 3: clear lenses with blue leds on sides and floor

next was doors off. not too bad, used trim tools to avoid scratching plastics and worked from underneath the grab handle, then prised it open round and over the top. if it did scratch it’d be on the underside and not too noticeable, luckily it didn't. unclip door release hook and free up various switch input wires, then the card is off.

removed the door controller harness (purple release catch) and slid it out of the casing. clipped in puddle light wires. red into slot 18 and black into slot 19. there’s a number 17 written on the side of the white harness to help locate these.

reassemble harness, wrap and secured to other wires with anti-rattle tape.

hook up and boot vagcom, go into door electric driver and passenger modules and add 64 to the coding value.

and they came on!

new set of trim clips for the doors and reassemble.

will get a better pic of them one night soon with the other variants i made:

easyrider · Post by **easyrider** » Mon Jun 15, 2015 6:04 pm

and while i was there i popped out the old switches, plopped the new ones in. couldn’t have been easier. got them from bold-sport.com.

Albrown59 · Post by **Albrown59** » Mon Jun 15, 2015 7:36 pm

Great write up for the puddle lights mate, bet they look awesome! Wish I had the balls to try it ha!

easyrider · Post by **easyrider** » Mon Jun 15, 2015 10:44 pm

Albrown59 wrote:Great write up for the puddle lights mate, bet they look awesome! Wish I had the balls to try it ha!

nice one, really not that hard but yeah ripping door cards off is never pleasant!

finally went dark... these are a bit bright so may have to wrap / tint the lenses like i did footwells. may try the red ones tomorrow.

easyrider · Post by **easyrider** » Tue Jun 16, 2015 1:35 pm

2 layers of tinted wrap, happy with these now, matches the black dash trim nicely.

Gmanr · Post by **Gmanr** » Tue Jun 16, 2015 3:38 pm

Stunning.

Scirocco Central

Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor

Re: Victor