RNS 510 Help Needed - No MFD

[m.porto]

Hi all as a newcomer to the site apologies in advance if I get the tech stuff wrong, recently purchased my first Scirocco, 2.0 TDI Salsa Red, DSG. I have upgraded the radio to a RNS510 unit however I don't get the sat nav on the MFD should I be able to see sat nav direction on the MFD?

Any assistance appreciated, based in Bournemouth.

Great site thanks.

PS I had the F1 ceramic coating applied and its a must for the perfect finish.

[chelspeed]

I do on mine. It's a 2013 R with colour MFD.

[martynk87]

You need to get your car plugged in to VCDS to configure the Navigation.

Link to the coding settings are - http://wiki.ross-tech.com/wiki/index.ph ... on_System_(RNS510" onclick="window.open(this.href);return false;)_Retrofitting

I did this on mine and it still did not appear so all I did was pull the fuse for stereo and now it appears on my dash. The fuse I pulled was fuse 8 in the under bonnet fuse box, but check this link to be sure - http://www.sciroccocentral.co.uk/forum/ ... =25&t=7403" onclick="window.open(this.href);return false;

[dimexi]

Your new RNS needs to be coded using VAGCOM/VCDS in order to activate the MFD sat nav directions

[Dubvrs]

As above you need to get it coded in. The canbus gateway needs to be told the car has nav fitted. Did mine and it only takes 5 minutes. Where are you located?

[m.porto]

As above you need to get it coded in. The canbus gateway needs to be told the car has nav fitted. Did mine and it only takes 5 minutes. Where are you located?

I am based in Ferndown in Bournemouth, would be great if you can help.

Brgds

[lewihoga]

Depends on what mfd you've got too? Have you got highline?

[m.porto]

Depends on what mfd you've got too? Have you got highline?

Hi thanks, it's the white highline.

[lewihoga]

yeah follow what the others said then!