Scirocco Central

Hi all, Anyone had any thought about sourcing the part online to replace? Around £600+VAT for the replacement part seems like daylight robbery to me!? Found another post on this topic on here and a few people referenced this replacement part: https://www.europaparts.com/intake-manifold-06j133201bh.h...

Hi all, Have the same P2015 issue that all here have mentioned. Been driving around my 61 plate TSI 2.0 for 6 weeks without any noticeable difference as a mechanic friend mentioned he wouldn't be bothered about it. Now looking to replace the part if i can find a cheaper eBay alternative is the £580+...

Hi guys, Drove to Scafell Pike on the weekend. Arrived and went to open the boot - it made an odd noise and then wouldn't close again. On closer inspection it seems as if the catch that locks the top boot into the car body isn't responding to the key and won't close... :fall: Can anyone tell me a pa...

Bumping this (very old) thread as my 61' Scirocco's alarm seems to have given up the ghost recently.. Error 01134 Alarm Horn H12 as suggested above.. Dropped the part numbers into Ebay (1K0 951 605D) & have come back with several parts for various other models – Golf, Passat and some Skoda, Audi...

Ok, so I re-downloaded carista & it came up with an error 00134 Alarm horn (H12) so it must be faulty or broken somehow. Hoping for a relatively easy/cheap eBay replacement, although the little research I’ve done suggests I might be in for a lengthy, expensive fix :( http://www.sciroccocentral.c...

Turned on ‘beep on lock’ using carista about 2 months ago. Used the car in the morning, beep worked fine. Came back to the car in the evening, no beep then and no beep since. Anyone had issues with this before? Not sure where to locate where the beep is coming from either if anyone can point me in t...

So, i have an update... A251H fits for the rear A980S does fit for the front... user error! Yep, was in 'service position', just wasn't going in at all. Think it's because i was trying to fit it the same way the old one came off - the new connector meant it needed more of an angle to get over the in...

The back ones I ordered were incorrect, doh. have ordered the Bosch A251H which look to have the same fitting as my current so hopefully will work fine. Will update once fitted. No real joy with front wipers either, the connector is a different shape to the current & not sure if it’s just me &am...

I'm not sure why yours would be different unless they have changed the fitment as I've used both Bosch 980S and VM331 and not had any issues.[/quote]

Me either, I’ll have a look after work & see if it’s just user error.



Sent from my iPhone using Tapatalk

I use the Valeo set VM331 on mine and in my opinion there as good as the Bosch ones. You can pick up a set from EuroCarParts / Carparts4less or any of the online wiper blade suppliers. Cheers Bob, will take a look - is the connector the same as the Bosch one? There must be a reason the Bosch set ar...

I got some bosch replacements which at first glance seemed fine. In use though they squealed like mad. On looking carefully I noticed that they were slightly loose on the arms and were tiliting backwards and forwards as the sweep direction changed. I bought some genuine ones and you could see (and ...

Was searching for new wipers & found this thread. Went with: - Bosch A980S (Front) - Bosch A330H (Rear) Front wipers have arrived & the connector point & serial numbers are different from new to old (pics attached). Is this not the right blade? Or am I missing something. The connectors a...

Was searching for new wipers & found this thread. Went with: - Bosch A980S (Front) - Bosch A330H (Rear) Front wipers have arrived & the connector point & serial numbers are different from new to old (pics attached). Is this not the right blade? Or am I missing something? The connectors a...

Nothing factual unfortunately but when I did some brief research into this a while ago I found that a few people said that the USB does need to be compatible so that may be a good place to start. Sorry haven’t got round to doing this myself but havent been wanting to for a while so please update if ...