Clutch noise

Talk about general things related to the new VW Scirocco in here.
Post Reply
User avatar
Alex230
Posts: 45
Joined: Wed Jul 13, 2016 5:28 pm
I drive a: GT 2.0 TSI
In: Rising Blue
With a: Manual box
Options: Rear parking sensors. Osram 4300k H7 bulbs. Amber parking lights.

Clutch noise

Post by Alex230 »

Hi guys, for some time now I'm facing this sound when the engine is cold and throw it in first gear to go off. When I lift the clutch pedal slightly, the re is a metalic hum noise, just when you feel the clutch grabbing.

I've found some videos with Golf 6 GTIs facing the same problem and they say it's the throw-out bearing. My mechanic says it's the clutch disk and i should change the whole assembly (clutch disk, pressure plate, flywheel). Another mechanic told me that if the clutch is fine, change only the bearing, tho he didn't hear the noise and he's just assuming.

Here is a clip with an exact same sound as mine. (6 speed mt)
I would not go full on changing the whole assembly if the clutch/flywheel and pressure plate are fine)

Thanks!

[youtube]aO8dZEJ489k[/youtube]
Last edited by Alex230 on Mon Jul 31, 2017 10:27 am, edited 1 time in total.
SciroccoEire
Posts: 83
Joined: Tue Oct 25, 2011 1:53 pm
I drive a: GT 2.0 TSI
In: Rising Blue
With a: Manual box
Options: Milltek Cat back , H&R Springs , Stage 1 Remap
Contact:

Re: Clutch noise

Post by SciroccoEire »

Mine was making that noise for about 2 years and ran fine , with no other clutch problems ( only for the slight annoyance of the noise )
It was the throw out bearing!
User avatar
Alex230
Posts: 45
Joined: Wed Jul 13, 2016 5:28 pm
I drive a: GT 2.0 TSI
In: Rising Blue
With a: Manual box
Options: Rear parking sensors. Osram 4300k H7 bulbs. Amber parking lights.

Re: Clutch noise

Post by Alex230 »

Mine has been doing it for the past 8-9 months ,but didn't really noticed it till some time ago. First time I heard it was last winter.
Guess i'll go and dissasamble the whole gearbox and inspect everything. If all is fine, I'll change only the throw-out bearing. (in Romanian it's translated as pressure bearing - guess it's the same thing)
Post Reply