*.* Scirocco R Build! (Fun, Tough & Cost) *.*

Mostic · Post by **Mostic** » Thu Jan 02, 2020 1:22 pm

Paradox1 wrote:
Mostic wrote:The real problem I have is that the front sway bar came without the installation brackets so I have to remove it from the OEM bar and install it to the H&R one which I see something really bad! Any idea from where to buy the front sway brackets?
You should be able to get them directly from H&R - Drop them an E-mail, they should be able to post you some

I already sent them an email but they are off and they will back in business tomorrow.

Paradox1 · Post by **Paradox1** » Thu Jan 02, 2020 2:55 pm

Worth waiting for as you should get them for free.

Have you decided on which turbo to go with yet?

Mostic · Post by **Mostic** » Thu Jan 02, 2020 3:01 pm

Paradox1 wrote:Worth waiting for as you should get them for free.

Have you decided on which turbo to go with yet?

I already have TurboZentrum EFR7163 ready to be fitted back as I had installed it last year before the engine failure. I will put it back but I am planning to go for a larger G30 or G35 turbo and DQ500 conversion. But I should save BULK of money! [emoji1][emoji1]

Paradox1 · Post by **Paradox1** » Thu Jan 02, 2020 4:12 pm

Mostic wrote:
Paradox1 wrote:Worth waiting for as you should get them for free.

Have you decided on which turbo to go with yet?
I already have TurboZentrum EFR7163 ready to be fitted back as I had installed it last year before the engine failure. I will put it back but I am planning to go for a larger G30 or G35 turbo and DQ500 conversion. But I should save BULK of money! [emoji1][emoji1]

I just went through you thread again as its been some time youve been working on this project.

If you decided to go for a garret turbo, instead of the GTX3071/67R, look at the g25 660 turbos. New series, supposed to be K04 spool with GTX30 delivery on boost!

Mostic · Post by **Mostic** » Thu Jan 02, 2020 4:20 pm

Paradox1 wrote:
Mostic wrote:
Paradox1 wrote:Worth waiting for as you should get them for free.

Have you decided on which turbo to go with yet?
I already have TurboZentrum EFR7163 ready to be fitted back as I had installed it last year before the engine failure. I will put it back but I am planning to go for a larger G30 or G35 turbo and DQ500 conversion. But I should save BULK of money! [emoji1][emoji1]
I just went through you thread again as its been some time youve been working on this project.

If you decided to go for a garret turbo, instead of the GTX3071/67R, look at the g25 660 turbos. New series, supposed to be K04 spool with GTX30 delivery on boost!

It is a continuous project

I am thinking of the G30-900 or G35-900

Paradox1 · Post by **Paradox1** » Thu Jan 02, 2020 4:54 pm

So 550bhp is no longer the target then hahaha

Mostic · Post by **Mostic** » Thu Jan 02, 2020 8:57 pm

Paradox1 wrote:So 550bhp is no longer the target then hahaha

No more [emoji1] targeting 750awhp

Paradox1 · Post by **Paradox1** » Fri Jan 03, 2020 10:28 am

Mostic wrote:
Paradox1 wrote:So 550bhp is no longer the target then hahaha
No more [emoji1] targeting 750awhp

You are insane lol

Do you know if the efr7163 fits RHD cars?

I may be in the market for one........

Mostic · Post by **Mostic** » Fri Jan 03, 2020 12:43 pm

Paradox1 wrote:
Mostic wrote:
Paradox1 wrote:So 550bhp is no longer the target then hahaha
No more [emoji1] targeting 750awhp
You are insane lol

Do you know if the efr7163 fits RHD cars?

I may be in the market for one........

[emoji23][emoji23]
Don’t know if it will fit or not but you can contact TurboZentrum and ask them.
Welcome on board

Paradox1 · Post by **Paradox1** » Fri Jan 03, 2020 4:34 pm

Just testing the waters, I was about to fit my k04 but now revisiting this thread has got me thinking.......

Chris-mowatt · Post by **Chris-mowatt** » Tue Apr 14, 2020 7:11 pm

Hi, did send you a message about this but I was looking for some more information about the fuel tank joining & the brackets you bought. I’m in the middle of doing my r32 awd conversion just now

Thanks

Mostic · Post by **Mostic** » Wed Apr 15, 2020 8:58 am

Chris-mowatt wrote:Hi, did send you a message about this but I was looking for some more information about the fuel tank joining & the brackets you bought. I’m in the middle of doing my r32 awd conversion just now

Thanks

Hi,
Sorry for the late reply, here are the brackets part numbers I ordered in order to install the cardanshaft

1K0 804 331
1K0 804 332

Unfortunately I don’t have pics for the tank while welding. You have to cut the Scirocco fuel tank neck and weld it in the Golf R tank neck, and this will need MANY try and error before you reach the right position and dimension.

I wish you the best in your project and let me know if I can help.

Note: PM replied [emoji4]

Mostic · Post by **Mostic** » Sat Jun 27, 2020 7:31 am

This fault appears after installing the iABED TSi Cam Follower Roller Conversion. I tried to install it without replacing the APR HPFP Spring but the car was misfiring then I installed the spring comes with the kit and the car started giving engine brake in the redline (the car stop by itself like you press the brake paddle hardly) and receive this fault!!

Do you have any idea why this happened?

Telwick · Post by **Telwick** » Wed Jul 01, 2020 9:44 pm

Really impressive build. Big fan of the detail and thought you have put in!

Mostic · Post by **Mostic** » Sat Jul 04, 2020 9:07 am

Telwick wrote:Really impressive build. Big fan of the detail and thought you have put in!

Thanks [emoji4] it become an endless project [emoji23]

a6lex · Post by **a6lex** » Mon Aug 03, 2020 9:24 am

Mostic wrote:
Alien_IROC wrote:Very good! So how have you resolved the ABS problem?
The cluster has to be patched to change from Scirocco to Golf with a golf chassis VIN too then the ABS coded.
I believe that the problem coming from the cluster because it sends the signal that it’s a Scirocco and the ABS can’t accept the AWD that coming from the Scirocco because there is no AWD Scirocco. Once it’s changed to Golf the ABS accepted the coding.

I want to try if changing the cluster itself from FWD to AWD would help and fix it not. I had similar issue with my MKV when I was trying to install a cluster moved out from R32 to my MKV GTI. The ABS didn’t accept coding until I changed the cluster from AWD to FWD.

Hi, I'm new on this site and found this while searching for ways to get my ABS to accept that my scirocco R36 is awd.
How did you solve it? I just ordered a Golf R Cluster but my plane is to use the Premium Cluster from Scirocco.
Did you reflash the EEPROM with new VIN, Power Class and enabled AWD? In that case it might be possible to just use a EEPROM flash from a Golf R?

Mostic · Post by **Mostic** » Sun Sep 06, 2020 7:53 am

Hi,
I was busy the last few months planning for the next upgrade step, and I did it!
DQ500, and Nortech G30-900 0.61A/R are completely installed yesterday. I am in the phase of checking the oil, air, etc leaks now; so, I will drive the car for a few days then will back again to the workshop to check them.
I am waiting for TVS Engineering to send the ECU & DSG files this week.
I am running now the Turbosmart Kompact Shortie Plumb Back that I was using with the EFR7163, any idea/recommendation for DV to use it with this turbo setup?

link for the Turbosmart Kompact Shortie Plumb Back
https://www.turbosmart.com/product/komp ... lumb-back/" onclick="window.open(this.href);return false;

Thanks

Mostic · Post by **Mostic** » Fri Mar 12, 2021 2:07 pm

Quick update..
Decided to back to work on the Rocco, so I gave the engine some shower after doing some leak checks.

Will do data-logging soon to get the proper tuning for fuel pump only before doing the Aquamist WMI.

a6lex · Post by **a6lex** » Mon Apr 26, 2021 4:35 pm

Mostic wrote:Quick update..
Decided to back to work on the Rocco, so I gave the engine some shower after doing some leak checks.

Will do data-logging soon to get the proper tuning for fuel pump only before doing the Aquamist WMI.

Nice seeing som update!

I'am at the moment putting a DQ500 in my Scirocco R36, to handle the power.

What bit did you change in the EEPROM to change from fwd to awd?

Mostic · Post by **Mostic** » Mon Jan 03, 2022 8:51 am

a6lex wrote:
Mostic wrote:Quick update..
Decided to back to work on the Rocco, so I gave the engine some shower after doing some leak checks.

Will do data-logging soon to get the proper tuning for fuel pump only before doing the Aquamist WMI.
Nice seeing som update!
I'am at the moment putting a DQ500 in my Scirocco R36, to handle the power.

What bit did you change in the EEPROM to change from fwd to awd?

Good luck with the DQ500 in the R36, I heard it is not straight forward.
Regarding the EEPROM, it is done by a friend of mine who is Canada now. I will try to ask him and get back to you.

Scirocco Central

. Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .

Re: . Scirocco R Build! (Fun, Tough & Cost) .