What did you do to your Scirocco today?

[blz-8027]

It's a complete assembly, not the ashtray with a different insert. Search the web for 5K0857961A 9B9 to see what I mean. I had to buy the surround, lid cover and rubber mat separately. Got them from Deutsche Parts, cheaper than VW and genuine parts.

Good luck with the covered cup holder, it's a bit of a pain but worth it.

Thanks

[blz-8027]

Good luck with the covered cup holder, it's a bit of a pain but worth it.

So many bits to remove to change a simple cup holder

[MackemVR6]

Yup, it's an awkward little bugger but satisfying when it's all back together, scratch free. Good work mate

[blz-8027]

Yup, it's an awkward little bugger but satisfying when it's all back together, scratch free. Good work mate

at work all day today ,so it has to wait till wednesday

so bought one of these as well to replace the Media input stuff as it doesnt get used

https://www.ebay.co.uk/itm/Interior-Cen ... SwXoJbSIin" onclick="window.open(this.href);return false;

[nathanial rabbitt]

got new brake calipers, now they are race red, also tinted the rear lights and debadged it

[blz-8027]

All back together ,apart from the covered ashtry that is being modded

[MackemVR6]

Nicely done! What are you doing with the ashtray?

[blz-8027]

Nicely done! What are you doing with the ashtray?

Thanks
Hoping to get a box made using a 3d printer ,to replace the ashtray insert ,
so its the same as the covered storage version

P:S
Do you know how the sides of the DSG gearlever are held on ,one side is loose on mine ,but wont clip back on

[MackemVR6]

Nicely done! What are you doing with the ashtray?

Thanks
Hoping to get a box made using a 3d printer ,to replace the ashtray insert ,
so its the same as the covered storage version

P:S
Do you know how the sides of the DSG gearlever are held on ,one side is loose on mine ,but wont clip back on

Sorry mate, mine is a manual. Is it the plastic surround that's loose or the chrome bit? The plastic part has a clip, you may want to pop it out again to make sure it hasn't broken.

[blz-8027]

Thanks

[Delbert]

Took it into work and serviced it and found the nearside front shockers leaking,,, not overly impressed for a 3.5 year old car with 25k on the clock

[MackemVR6]

Had the timing chain tensioner, chain, guides etc replaced for peace of mind. Not a cheap job but cheaper than an engine rebuild.

[designer1971]

swapped rear wheels to front as worn on inside and humming like worn bearing!humming now at front so defo tooth saw tyre wear!
Happy in one way!

[designer1971]

swapped wheels from rear to front cos of tooth saw rumble

[L_Faith]

Today I painted the brake calipers and debadged [emoji38]
Only had my Scirocco for a month so there's more work to be done!

Sent from my CLT-L09 using Tapatalk

[Tenko73]

Sachs dual mass flywheel (eight crank bolt holes)
- 30% uprated pressure plate (not heavy under-foot)
- carbon Kevlar lined clutch driven plate (nice and smooth but precise engagement)
- a concentric slave cylinder release bearing
- a set of flywheel retaining bolts
- a set of clutch bolts

Ready for Saturday's re-map.

[Tenko73]

Had the the pipe replaced that was causing my fault code P0101. The mechaninc damaged it fitting the clutch! He reckons it's all good. Gonna have to give it some beans tonight to make sure.
All ready for AGChiptuning to remap tomorrow.

[Tenko73]

Stage 1 done. Thanks to Alex at AGChiptuning for that and for letting me know that I have a healthy engine. Would highly recommend him for your tuning needs.

Sent from my TA-1033 using Tapatalk

[Tenko73]

Please disregard the above. I had the car dyno'd and i got 235bhp as the fuel is running rich. I now have to have the car put back to stock to have the fuelling adjusted. Hopefully its not the Lambda sensor. If they can adjust the fuelling and reinstate the remap and it hits 250 i'll be happy but, it has still cost me for a dyno and will cost me for the adjustments. All in all, an expensive remap. You live and learn.
In a nutshell don't get your car mapped by AGChiptuning.

[Tenko73]

This was the Dyno run after the AGChiptuning remap

Sent from my TA-1033 using Tapatalk