Changing Pads & Discs

[LJP1991]

Hi All,

Looking for a little bit of help. Scirocco R 2011 plate.

Changing my rear pads & discs and come across an issue. Removed break pads & holder fine.

The caliper is left (cant slide out the pads without removing it unfortunately), and there held on by two bolts (photo attached).

I think this is a SPLINE Socket - link to range below. But before I went and bought them I was wondering if anyone knew if this was correct?

Would really appreciate the help!

Thanks

http://www.screwfix.com/p/laser-spline- ... UQodYSkErQ" onclick="window.open(this.href);return false;

[Paradox1]

hi,

Pads should fall out when you remove the caliper, the Carrier needs to be removed to get the disk out usually.

Yeah thats definitely a 12 point spline. not sure of size but 12mm springs to mind. there should be two to remove.

Let me know how you get on

[LJP1991]

Yep pads were off and caliper. Just the carrier left with these 2 x spline bolts.

Thanks pal, appreciate it!