Hi,
I installed an RNS510 last year and it all works great apart from the instructions not showing up on the MFD. I have the full version of VCDS and want to enable it. Does anybody know what the adaptation codes I need are?
Thanks
Terry
Enabling RNS510 MFD
-
RW1
- Legend
- Posts: 4680
- Joined: Tue Jul 07, 2009 9:06 pm
- I drive a: 1.4 TSI 160
- In: Candy White
- With a: DSG box
Re: Enabling RNS510 MFD
Try searching....... http://www.sciroccocentral.co.uk/forum/ ... %2A#p84093" onclick="window.open(this.href);return false;
C.
C.
Week 43 Build has happened on time! 22 Oct'09 Scirocco is at Check Point 5 in the factory
23 Oct'09 Now Complete on the dockside, 24 Oct'09 Sailed from Portugal, 27 Oct'09 In the UK,
29 Oct'09 at dealers Driving 4th Nov. Sorted!
23 Oct'09 Now Complete on the dockside, 24 Oct'09 Sailed from Portugal, 27 Oct'09 In the UK,
29 Oct'09 at dealers Driving 4th Nov. Sorted!
Re: Enabling RNS510 MFD
I had searched but couldn't find the exact byte and bit to enable. Thank you
Re: Enabling RNS510 MFD
You need to ensure 'Navigation 37' is populated in the Can Gateway (controller 19) as well as radio 56, you then need to ensure BAP is enabled in device (Navigation) 37, byte 7 bit 7 and another bit which is called 'Small button... (sorry can't remember the rest but you will see it!). You may need to reboot the RNS afterwards too.