Turning off DRLs, etc - software+cable?

Technical discussion such as Bluetooth, Sat-Nav, iPods, tyres, brakes, all that kind of stuff.
Post Reply
peter-h
Posts: 33
Joined: Sun Jul 01, 2012 9:25 pm
I drive a: GT 2.0 TDI 170/184
In: Rising Blue
With a: Manual box

Turning off DRLs, etc - software+cable?

Post by peter-h »

I am sure this has been done to death (I am new here) but there seem to be several options for the software e.g.

http://www.totalcardiagnostics.com/toad/" onclick="window.open(this.href);return false; (does diagnostic graphs and also allows resetting/tweaking)

The EOBD mentioned above
EOBD OBD 1 2 VAGCOM ECU Remapping Chip Tuning: Diagnostic Software For All Cars

This is also interesting
http://www.sciroccovw.com/2010/01/conne ... -via-obd2/" onclick="window.open(this.href);return false;
but it seems that stuff does graphical parameter display only, not simple tweaks like DRLs.

Also most of the OBD2 cables come with some sort of software anyway e.g. the ELM327 has this
http://www.oinhi.com/Driver/EML327_Black.zip" onclick="window.open(this.href);return false;

But it's obvious that one needs a car-model-specific program otherwise you are presented with a load of binary or hex data which is meaningless. I am a hardware/software developer but I am not going to twiddle various bytes in the config to see what stop working :)

What do the experienced people here suggest?

I've ordered this on Ebay
http://www.ebay.co.uk/itm/ws/eBayISAPI. ... 0747671600" onclick="window.open(this.href);return false;

and this software
http://www.ebay.co.uk/itm/ws/eBayISAPI. ... OC:GB:3160" onclick="window.open(this.href);return false;

It hasn't turned up yet.

It doesn't seem expensive - is this right for a new Scirocco 140 or 170GT? We would like to disable the DRLs and if possible enable a beep for when the car is locked/unlocked. The car is a 140 diesel, but we have a 2nd one on order which is a 170 and that has xenon lights so the DRL issue should not be present because the xenon lights have a separate DRL strip, supposedly...
Post Reply