TPMS help!

[Firemonkey]

Can anyone help me iv just installed the TPMS reset button but it doesn’t seem to work. I’m not sure if it’s the wiring or the coding. The wiring I did is

ESP button

I took out the following pins and placed them in the little black connector that comes with the kit.

ESP button Pin 3 Brown to pin 3 on the little black connector

ESP button Pin 6 Grey to pin 1 on the little black connector

ESP button Pin 5 green/purple to pin 2 on the little black connector (this is the wire I’m not sure about as iv seen someone with a golf mk6 use the black/green wire)

TPMS button

The wires where labelled:

Braun = brown
Grau = grey
Schwarz = black

Brown wire into pin 3 on the ESP button = Brown

Grey wire into pin 1 on the ESP button = Grey

Black to pin 5 on the ESP button = Green/purple

The coding I did was in the ABS module byte 16 bit 2 the code got accepted ok and flashed on my dash then off.

But I get an error code when I scan the car the code is 01325.

Be a great help if anyone knows what iv done wrong.

Cheers

[addy73]

theres 2 codings you need to do not just one.

[Firemonkey]

What’s the other code do you know it? The warning light came on today but the button didn’t do anything could that be because I haven’t fully coded it?