N80 EVAP Purgle Valve Open error code

[Jestar]

Hi Guys,

Ever since i got a new turbo fitted i'm running into errors.
I just started my car and saw the engine light come up, once i got home i went into vcds and saw that the N80 purge valve was on open.

The code was from 17:11 and the code/light came on at 21:10....

I cleared the code but how do i fix this and what does the valve do?

Help is appreciated and i'm thinking about selling the scirocco.....

[Cuprabob]

As I understand it the valve controls the vapour stored in the charcoal canister and when open allows it into the intake to allow it to be burnt. It's a relatively cheap part to replace.

[Jestar]

As I understand it the valve controls the vapour stored in the charcoal canister and when open allows it into the intake to allow it to be burnt. It's a relatively cheap part to replace.

Thanks, do you know a part number for this part?
I'm searching in etka but i can't seem to find it...

[Cuprabob]

Double check the part number as it may not be the same one as the Golf.

Part No. 06E906517A

[Jestar]

I'll check if the error comes back and will call the dealer for a price...

[Cuprabob]

I would be surprised if it's more than £25. Obviously check the connections on your current one.

[Jestar]

I've checked the etka database with the number you provided.
It's the same as what's in my scirocco

[Jestar]

Is this the valve?
http://s16.postimg.org/4nns3jin7/IMG_99 ... 1464611569" onclick="window.open(this.href);return false;

[blower]

Is this the valve?
http://s16.postimg.org/4nns3jin7/IMG_99 ... 1464611569" onclick="window.open(this.href);return false;

The one at the top of the picture in the middle - yes.`
To get it off the bracket, spray a little oil (wd40 will do) to loosen it up as the rubber bracket that surrounds the valve tends to harden and stick over time.
With the hoses i spray some penetrating oil where they join to the barbs and let them sit for 5 minutes, after removing the hose clip of course - again the rubber sticks and removing them can be difficult.

[Jestar]

Replaced it but one of the connector plug cables broke...
Hopefully the garage can solder it together...

[Satriani7007]

Hi,just done check on my engine and have fault code 001092-EVAP purge control valve N80.
So called be dealer to order new one ,gave them exactly part number from old one and they said it’s discontinued.
Apparently now i can't buy the old version which was around £20 , so it’s gonna be over £100 cos it’s totally different setup
After typing on google this part number 06H 906 517H (number from my faulty valve)I got results from bosh 06H 906 517A , so difference its beetwen H and A and wondering if this still would work?

Any help please.