Scirocco Central

Posted: **Wed Mar 19, 2014 10:20 pm**

Hello,

I'm going to buy 3sdm 0.01 19 ", but I'm pretty green at this and really do not know which of the width / offset should I choose not to rub the wheel arches during a normal drive and from falling in potholes ( polish poor roads...) . My car is on eibach pro kit ( -30 f, -25 r ). I thought about 8.5x19 ET32/42 on 235/35/19 or 9.5x19 ET40 on 245/35/19. What you advice me ?

Cheers,
David

Posted: **Thu Mar 20, 2014 7:40 pm**

Either 8.5 et 32 all around, or 9.5 all around with 5 mm spacer on the front, as ET 40 rubs on the abs-wire if you lower it a bit more. Either way, use 235/35 tyres

Sent from my C5503 using Tapatalk

Posted: **Fri Mar 21, 2014 4:24 am**

i have 3SDM 001 front and rear 9.5 x19 et 40 235 tyres.Had 2mm taken off the rear rims .245 tyres wont work

Scirocco Central

Which width/offset of rims ( 3sdm 0.01 )

Which width/offset of rims ( 3sdm 0.01 )

Re: Which width/offset of rims ( 3sdm 0.01 )

Re: Which width/offset of rims ( 3sdm 0.01 )