Page 1 of 1
Aux & media help needed
Posted: Sat Dec 08, 2012 1:35 pm
by Deco444
Whenever I plug my iPhone in either through the cable that plugs in under the arm rest , or the aux cable , the sound is horrible & crackly , but via radio or CD its crystal clear , there has been one time it's played clear through the cable , do you think it is a fault with the cable it's self or is there a wrong setting that's on ? Any one else had this problem ? Any help would be amazing , thanks .
Re: Aux & media help needed
Posted: Sat Dec 08, 2012 3:09 pm
by RisingRoc
Is your iPhone in a case? Remove the case to make sure the cable is fully engaged and see how it works.
Re: Aux & media help needed
Posted: Sat Dec 08, 2012 3:16 pm
by whiteDevil_170
What unit do you have rns etc? I know that on my rns315 when you go in to sound settings you can adjust the sound output for mdi and Bluetooth audio. I have mine set to low. But if its set to high and you turn it up half way that could cause poor sound quality and make it crackle.. just a thought.
Re: Aux & media help needed
Posted: Sat Dec 08, 2012 6:39 pm
by Deco444
iPhones not in a case no
I'm not sure which unit it is its a 10 plate with the dynaudio , that sounds like it could work il give that a try thanks
Re: Aux & media help needed
Posted: Mon Dec 10, 2012 7:42 pm
by Starshaped
Yes set aux input level to low and see if that works.
Re: Aux & media help needed
Posted: Mon Dec 10, 2012 10:48 pm
by Dazza_666
Had this with mine. Set it to low and now sounds a treat. I only noticed it when upgrading my speakers to focals though.
Re: Aux & media help needed
Posted: Mon Dec 10, 2012 11:11 pm
by whiteDevil_170
I was just playing about with EQ and then came across it. Changed it and noticed the difference straight away , sound was terrible. So quickly changed it back to low.
Re: Aux & media help needed
Posted: Tue Dec 11, 2012 8:44 pm
by MNM
Check the Volume adjustment of all ur songs on itunes (select all..right click...get info) ... Keep the bar in the middle. Then sync the phone. Try it after
Re: Aux & media help needed
Posted: Wed Dec 12, 2012 11:34 pm
by Deco444
I got it thanks alot for the help !!!
It was the output was set to high , hence it being so crackly , thanks again
Re: Aux & media help needed
Posted: Thu Dec 13, 2012 7:12 am
by whiteDevil_170
No problem.
![Smile :)](./images/smilies/smile.gif)