Hi,
So i recently purchased a 2010 1.4 TSi Scirocco which can i add i love to bits, but something thats really been bugging me is when i first brought the car the MPG was displayed on the centre display screen between the Revs and Speedo, but now when i turn the car over and drive its just the actual temperature outside the vehicle, any ideas on what i need to press to get this back on cause i would like to know what im getting with fuel and what not....
Thanks
P.S if this has already been covered can you post the link please
Trouble with changing to MPG display on centre dispaly
- RW1
- Legend
- Posts: 4680
- Joined: Tue Jul 07, 2009 9:06 pm
- I drive a: 1.4 TSI 160
- In: Candy White
- With a: DSG box
Re: Trouble with changing to MPG display on centre dispaly
Its changed by the little rocker switch on the end of the wiper stalk. Its explained in detail early on in the service booklet 3.1 Controls & Equipment located in your service wallet.
http://www.sciroccocentral.co.uk/forum/ ... alk#p94506" onclick="window.open(this.href);return false;
C.
http://www.sciroccocentral.co.uk/forum/ ... alk#p94506" onclick="window.open(this.href);return false;
C.
Week 43 Build has happened on time! 22 Oct'09 Scirocco is at Check Point 5 in the factory
23 Oct'09 Now Complete on the dockside, 24 Oct'09 Sailed from Portugal, 27 Oct'09 In the UK,
29 Oct'09 at dealers Driving 4th Nov. Sorted!
23 Oct'09 Now Complete on the dockside, 24 Oct'09 Sailed from Portugal, 27 Oct'09 In the UK,
29 Oct'09 at dealers Driving 4th Nov. Sorted!
-
- Posts: 6
- Joined: Mon Nov 19, 2012 9:27 pm
- I drive a: 1.4 TSI 160
- In: Candy White
- With a: Manual box
Re: Trouble with changing to MPG display on centre dispaly
Thanks RW1 your a start was confusing the hell out of me should of looked in the service booklet my bad
thanks again dude
thanks again dude
-
- Posts: 18
- Joined: Wed Mar 02, 2011 7:02 pm
- I drive a: 2.0 TDI 140
- In: Reflex Silver
- With a: Manual box
Re: Trouble with changing to MPG display on centre dispaly
I posted a similar problem, Ican't get my speedo to read out digital on MFD I've been into hanbook, been into MFD Data settings but the Digital speed on/off option is not there asit is in the handbook. Looks like it could need plugging in to computer grrrrr