Page 3 of 4
Re: SCIROCCO 2011 Facelift done
Posted: Tue Dec 04, 2018 8:01 pm
by Argonaut
Marius336 wrote:your LED DRL dim from DRL to parking light?
No because I run on old BCM, on the 087AB BCM it would only work.
I had that bcm but it was for keyless - trash
Re: SCIROCCO 2011 Facelift done
Posted: Tue Dec 04, 2018 8:03 pm
by Marius336
i have 087 AB but dont dim
BCM was new and Bit 18 was set manualy, no scirocco preset
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 4:06 pm
by davidscirocco
i have 087 AB and i think mine dims
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 6:16 pm
by Roy_01
What dimming setting do you have in VCP, 2? And in VCDS byte 24?
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 6:49 pm
by davidscirocco
i must check but the bcm was taken out from a vw scirocco R facelift so i almost did not change anything from coding. i didnt even need to do anything with vcp for the tail lights because it was already coded
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 7:18 pm
by Roy_01
Can you post a scan of your module 09 coding?
Interested in your settings. You were lucky with that Scirocco R facelift bcm.
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 7:55 pm
by davidscirocco
Roy_01 wrote:Can you post a scan of your module 09 coding?
Interested in your settings. You were lucky with that Scirocco R facelift bcm.
i will post tomorrow
i have obdeleven, is there something specific you want to see on module 9?
i really am lucky thanks to you
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 8:18 pm
by Roy_01
Only the coding of the bytes of module 09 , the long coding.
Your welcome, i also had a lot of help of others on this forum
Re: SCIROCCO 2011 Facelift done
Posted: Wed Dec 05, 2018 8:24 pm
by davidscirocco
ok will sent the long coding tomorrow
Re: SCIROCCO 2011 Facelift done
Posted: Thu Dec 06, 2018 7:07 am
by Jason1
Do you have part number for the caps on the front bumper under the headlights.
Re: SCIROCCO 2011 Facelift done
Posted: Thu Dec 06, 2018 6:52 pm
by davidscirocco
Re: SCIROCCO 2011 Facelift done
Posted: Thu Dec 06, 2018 8:13 pm
by Roy_01
Yes that is what we want
Thanks David!
Re: SCIROCCO 2011 Facelift done
Posted: Thu Dec 06, 2018 8:49 pm
by davidscirocco
after all the help i needed from you im glad i can be handy
Re: SCIROCCO 2011 Facelift done
Posted: Thu Dec 06, 2018 8:53 pm
by Roy_01
Good job
The difference between us is that you have checked:
Byte 11 bit 6
Byte 16 bit 3
Byte 17 bit 1 & 2
I cant remember i setup dimming with vcp lol.
Re: SCIROCCO 2011 Facelift done
Posted: Thu Dec 06, 2018 9:10 pm
by davidscirocco
have you try to see if it dims now?
Re: SCIROCCO 2011 Facelift done
Posted: Sun Dec 16, 2018 10:12 pm
by Argonaut
Wow thank you David you really helped. If only my AB module was right I would have had it coded right. You were lucky when you got that BCM, they are hard to find in general.
Stay tuned for updates on the car, I have something nice
Re: SCIROCCO 2011 Facelift done
Posted: Wed Jan 02, 2019 10:31 pm
by Argonaut
Re: SCIROCCO 2011 Facelift done
Posted: Sat Jan 05, 2019 6:36 pm
by nlscirocco
Are the facelift rear parking sensors working?
Re: SCIROCCO 2011 Facelift done
Posted: Sat Jan 05, 2019 6:38 pm
by Roy_01
Wow it’s beautiful!
Re: SCIROCCO 2011 Facelift done
Posted: Sun Jan 06, 2019 3:04 pm
by Argonaut
@nlscirocco no, they don't work because I don't have that optional extra. Sensors are just there to fill the holes for now.
@Roy_01 thank you man! Told you I had something big