R Exhaust Finish

[jonallen628]

Can any R owners confirm the finish on the inside of the exhaust trims? Odd question i know.

Cleaning the chrome outer surface today i noticed the inside surfaces looking terrible, rough surface with what appeared to be scratches in the finish. Can only assume it was from a previous cleaning attempt.

Starting cleaning them and soon realised that the inside appears to be painted black and the cleaning process was removing the damaged paint.

Had a look on the net and the pictures do appear to suggest the inner is painted matt black.

What i have been left with is a chrome finish on the outside of the pipes and a bare metal finish on the inside where i expect it was painted originally. It actually looks ok at the moment, not sure how it will fare over time.

Can anyone confirm whether the trims are indeed painted on the inside? May look at getting some replacements.

It was a bit dark when i took the photo.

photosmall.JPG

[sciroccorocket]

the outside chrome and the inside is bare steel i think its soot that makes it black but it will polish if you have the patients

[Tsakonas]

I assume you are aware of the fact that you have to clean the exhaust wearing gloves and mask...Exhaust gas residues are extremely harmful....

[Shaun]

I assume you are aware of the fact that you have to clean the exhaust wearing gloves and mask...Exhaust gas residues are extremely harmful....

I find it easier to clean the exhaust with the engine 'OFF'

[Shaun]

the outside chrome and the inside is bare steel i think its soot that makes it black but it will polish if you have the patients

As above the inside was just like a rolled stainless finish on mine, i have let the internal part go black (as its to rough to get properly polished) and just do the outside.

[sciroccorocket]

I assume you are aware of the fact that you have to clean the exhaust wearing gloves and mask...Exhaust gas residues are extremely harmful....

No we are hardcore in Cumbria

[jonallen628]

Thanks for all the comments, the uniform and tough nature of the "black" made me think it was painted. Managed to get a decent finish inside and out with wire wool and elbow grease. Unfortunately my right foot is busy undoing all my good work. :-)

[jonallen628]

I assume you are aware of the fact that you have to clean the exhaust wearing gloves and mask...Exhaust gas residues are extremely harmful....

Appreciate the sensible advice, totally agree but I never practice what I preach unfortunately. Must invest in some gloves for car cleaning!

[b0rk]

Wire wool on a chrome tip? personally I wouldn't as its way to easy to break through the thin electro plated chrome to the steel underneath.

You need to try Autosol and a microfibre cloth, if they're really sooty leave it to soak then rub and rinse the wax off afterwards.

[Dobbin]

I've been using OOO grade steel wool (like this http://www.amazon.co.uk/Faithfull-ASW1O ... B000C752EK) on the tail pipes of my GT for the last three years with no ill effect. Have found it very effective.
Have to confess I've never had a car with such mucky pipes!

[wigit]

reason i went ceramic tips on the milltek was fed up of cleaning, fancying a titanium finish on the new arrival

[Nick Roc]

No such problem with my APR RSC TBE!

[jonallen628]

I've been using OOO grade steel wool (like this http://www.amazon.co.uk/Faithfull-ASW1O ... B000C752EK) on the tail pipes of my GT for the last three years with no ill effect. Have found it very effective.
Have to confess I've never had a car with such mucky pipes!

Wire wool and megs metal polish seems to be working well. None of the others shifted the initial grime. Suggest maintaining now could be achieved with polish and microfibre.