Marius Rocco

[rikkky243]

Cool! now with quarantine you can work more on this project, we have to think positive ahah

[Alien_IROC]

Super project! Also a manual gearbox CDL, very rare!
What turbo did you install? A new K04 or bigger?

[Marius336]

new K04 because it had play inside the turbine

[Alien_IROC]

Where you have bought it from? I'm thinking to go stage 3 on my 2.0 TSI....

[Marius336]

http://www.ladermanufaktur.de/" onclick="window.open(this.href);return false;

[Alien_IROC]

Thanks!

[jpsc]

Hello Marius very nice Project

maybe you cam help Me

i have a 2010 Scirocco and a want to change my Steering Wheel What i need to do that?

I have this one:


And want to change to that one:



I made the change but only 2 buttons work the others not.

Can you help me?

[Dreamer]

You may have to change the slip ring controller and then code it to your car. Make sure you do an autoscan and save it using VCDS.

Then you may need to code it assuming your car will accept it


Sent from my iPhone using Tapatalk

[jpsc]

do you mean

need:
1K0-959-653-C or 1K0-959-653-D

and you need new Steering controll module:
1K0-953-549-CD/CH/CK

[Dreamer]

Potentially yes. You will to research it


Sent from my iPhone using Tapatalk

[Marius336]

with 1k0 steering module you need modification to the button to make the light work












with 5k0 Steering module wheel should be plug and play

[jpsc]

Many thanks Marius

the lights in the new steering wheel works fine and two buttons, the rest did not.

can be a configuration problem?

[Marius336]

Dont know with 1k0 steering module, only did 5k0 steering module so far

[Marius336]

Fitted electric seat

[Roy_01]

Nice! What is the function of that button on top.
Easy entry?

[Marius336]

Yes, the seat have a easy entry module.

It remeber the position were the seat was befor folding, yust like the mechanical seat. its some kind of memory function

[Marius336]

Engine is in, and runs, yust need a bit wirering work, bacause my car had start stop funktion from factory, that needs to be removed, so the engine can start normal. Now it starts on ignition and without cluch

[Marius336]

swap done, car drives amazing

[Roy_01]

Impressive, what a nice workplace you have there.
Enjoy your new engine! How much power does it have?

[Marius336]

The GTI i pulled the engine of had Stage 1 Tune to 310 HP but my ECU got Flashed to CDLK Scirocco R facelift with 280 HP, But with the Scirocco Facelift Flash, my Boost gauge show the right data