Marius Rocco

davidscirocco · Post by **davidscirocco** » Thu Dec 06, 2018 8:26 pm

i have check to see what requirements i need to make the high beam assist and i dont have the camera back of my on my center mirror. so even if i wanted i need to retrofit that camera...

Roy_01 · Post by **Roy_01** » Thu Dec 06, 2018 8:56 pm

Oh stupid i forgot, then you are right uncheck it.

davidscirocco · Post by **davidscirocco** » Thu Dec 06, 2018 9:08 pm

Marius336 · Post by **Marius336** » Thu Dec 06, 2018 9:49 pm

there is a high beam assist without camera, you know?

you dont need to do the Passat camera to have high beam, there is a light diod one

davidscirocco · Post by **davidscirocco** » Fri Dec 07, 2018 4:53 am

I did not now that. Is it easy to retrofit?

Roy_01 · Post by **Roy_01** » Fri Dec 07, 2018 8:58 am

You mean the light assist rear view mirror?

Marius336 · Post by **Marius336** » Fri Dec 07, 2018 11:59 pm

yes ,

1k8857511b

there is a kufatec harnes for that, only work MY +2010 with BCM

davidscirocco · Post by **davidscirocco** » Sat Dec 08, 2018 12:24 pm

i have seen a video on youtube someone retrofitting this. i think you have to change the 6 pin connector to 8 pin and have to connect canbus cable from the mirror to the canbus AFS module and then there are some coding and thats it. correct me if im wrong

Roy_01 · Post by **Roy_01** » Sat Dec 08, 2018 4:19 pm

Just connect to the can gateway, but the rest is right easy swap.

davidscirocco · Post by **davidscirocco** » Sat Dec 08, 2018 4:26 pm

Will think about it. Im going to change the headliner so maybe ill just pass the cable and when i need to change it will be an easy change

Marius336 · Post by **Marius336** » Sat Dec 08, 2018 9:59 pm

yes, change 6 pin plug from mirror to 8 pin

Niqlai · Post by **Niqlai** » Thu Jan 03, 2019 8:53 am

Hello mate.

Have you bought the car with side assist, lane assist, park assist and so one or have you done that your self ?

Marius336 · Post by **Marius336** » Fri Jan 04, 2019 12:35 am

all by my self, these things you cant get from VW for Scirocco, only in Passat.

Niqlai · Post by **Niqlai** » Fri Jan 04, 2019 8:04 am

I will sent you a PM

Steve_MCG · Post by **Steve_MCG** » Sat Jan 26, 2019 6:16 pm

Hi Marius, I seen your Retrofit of MIB2 to your Scirocco, did your unit have the CP removal done on the motherboard? Is the canbus gateway necessary for retrofit? I have been looking to do this retrofit for some time and have not found a lot of information on how to do this with Sciroccos. Any help appreciated and you car looks awesome!

Marius336 · Post by **Marius336** » Sun Jan 27, 2019 3:11 pm

i got a new DM and Tim from VCDSWorkx did the Component Protection direct to my 3D Cluster. So my Component Protektion is aktiv like in Real Facelift Scirocco.
Gateway is not realy nessesary, but i recomand to et a gateway that support 5F

Marius336 · Post by **Marius336** » Wed Feb 13, 2019 7:29 pm

For more information look at Lane & high beam assist & fatigue detection installed

Roy_01 · Post by **Roy_01** » Wed Feb 13, 2019 8:18 pm

Very nice job Marius, if VW sees this they hire you directly

Marius336 · Post by **Marius336** » Wed Feb 13, 2019 8:29 pm

i study car engineering in Wolfsburg

Roy_01 · Post by **Roy_01** » Thu Feb 14, 2019 8:13 am

Then it makes sense haha.

Scirocco Central

Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco

Re: Marius Rocco