Custom Scirocco R Build

[fillZor]

Nicely done! Love the colour! Do you have more pics of the rear diffusor?

[Zanic L3]

- I am still deciding between Armytrix and Milltek Exhaust and don't know if Armytrix is worth the difference


I have just a miltek non resonated catback on my 2.0 TSI and I would say it's not super loud in low revs but comes alive after 2.5-3k revs. It's quiet when you want it to be and loud when u want it as well, it's a good mix
If you are going to use your car for daily use I say get the miltek. If it's only for weekends I would get something louder and a downpipe

[cristispd]

As soon as I get my car, because I didn't want to get it out of the garage till my new spoiler comes, I will post a video and will post my review of the Armytrix exhaust. I, of course, started the car already and I can tell you that the exhaust is loud, almost too loud if you ask me(your neighbors will not be happy when you cold start) but that's why you have a remote to open and close the valves.

[Zanic L3]

As soon as I get my car, because I didn't want to get it out of the garage till my new spoiler comes, I will post a video and will post my review of the Armytrix exhaust. I, of course, started the car already and I can tell you that the exhaust is loud, almost too loud if you ask me(your neighbors will not be happy when you cold start) but that's why you have a remote to open and close the valves.

It's a +3k € exhaust?

[cristispd]

I think it was 2750 EUR including the down pipe.

[cristispd]

Freezing rain results in a cool photo

Project is almost done, still waiting for February to install all the mods and finish the job.

[cristispd]

Car is ready

[cristispd]

The color of the wrap seems a little bit different outside in daylight

[cristispd]

UPDATES

I've mounted the Powerflex Anti-lift kit and the lower engine mount. Can't get over the vibrations I get from the engine now. Also when I move the wheel from left to right without moving there are cracks coming from underneath the car which are for sure from the Anti-lift kit because nothing has been change besides this. Will have a look this week under the car to check if anything else is making the noise. Anyway, the lower engine mount will come off for sure, it is impossible to drive the car knowing that at 1000-1100 RPM the car feels like breaking apart.

[cristispd]

Here are the list of mods I have done so far:

Exterior mods
- Facelift rear end conversion
- Modded Maxton Design Front Lip - Laminated in carbon fiber
- Modded Ingo Noak Diffuser - Laminated in carbon fiber
- ASPEC carbon fiber wing spoiler
- PWF Matt Copper Blast wrap
- Japan Racing JR18 19 inch wheels (looking soon for upgrading them)

Interior Mods
- Full interior redesign done in alcantara with blue stitching
- Carbon fiber trims

Performance Mods
- KW V3 Coilover Suspension
- HPFP and also Bosch 044 Inline Fuel pump
- Audi R8 Ignition Coil pack
- Wagner Tuning Intercooler
- Forge PCV Delete
- Forge Recirculating Valve
- Ramair intake
- Armytrix Straight Pipe Exhaust
- EBC Brake Discs
- Stage 2+ Software
- DSG Software upgrade

[cristispd]

*Wrong post

[Zanic L3]

^The images are private or something, we cant see them

I'm not too sure about the wing imo

[cristispd]

Sorry, you are right.. They are from my google drive account and I don't know how to make them public. I will add more on another image sharing website:

[cristispd]

[Paradox1]

At lot of hard work and money gone into this.

how are you finding the KW 3 coilovers?

[cristispd]

I have a set on my Mercedes too. Can't go without them, a little bit on the stiff side but the car feels a lot much nicer. Definitely the change I would make first on any of my cars.

Sent from my VOG-L29 using Tapatalk

[cristispd]

Interior shot (Alcantara, Leather and Carbon accents)

[cristispd]

@cristispd if you want to follow me on Instagram for more photos and videos

Sent from my VOG-L29 using Tapatalk

[hherbyy]

Is the Aliexpress special Cup spoiler any good? did it need modifying too much? is it good quality? looking to get a cup spoiler but nobody is selling Gen anywhere and this looks so cool

[cristispd]

Is the Aliexpress special Cup spoiler any good? did it need modifying too much? is it good quality? looking to get a cup spoiler but nobody is selling Gen anywhere and this looks so cool

Nope, it is really poor quality. It is made of fiberglass but it came with cracks and needed a lot of work to make it the way it was meant to be. I was given a 150 eur refund. I laminated it in carbon fiber and then did some work to fit the car. I would not recommend unless you want to go through I went to get it in perfect condition.