Bagged Scirocco from Finland / / Facelift

[Jimijokela]

More...


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr

[llweemanll]

Hi,

I'm french so i'm sorry in advenced for my bad english language...

I have a Scirocco R from 2010 and i would like to install the new facelift xenon.

The Xenon work but the LED doesn't work...

I have a vagcom and follow this tuto http://forum.vw-scirocco.fr/viewtopic.php?f=41&t=16260" onclick="window.open(this.href);return false;.

Can you help me for connection please because it's not the same connection to standar scirocco... ?

Thanks

[sc cal]

I installed the facelift xenons using the same tuto on a reg 1.4 tsi rocco and everything is working , i would double check your wires, module and coding

[llweemanll]

Yes but on the Scirocco R it's not the same connecting for the terminal. I do this on my old scirocco TDI 140 and everything was ok !

So if someone do this install on a Scirocco R please help me

[llweemanll]

Jimijokela can you help me please ?

[Jimijokela]

I dont know how to on scirocco r.. But only difference on the r is the blinker in the headlight..

[llweemanll]

Oh sorry I thought you had a scirocco R... Yes it's not the same connecting...

[llweemanll]

Where can i buy rear facelift ?

[llweemanll]

UP

[Roy_01]

Is your headlight drl stil dimming when the dipped beams are on after joining pin 10 and 12 together?
And is the static cornering light controlled by the canbus? I see no pins in the headlight connector on pin 13.

[Philuk]

That's stunning mate,




Prefer the new wheels they seem to suit it better

[llweemanll]

Is your headlight drl stil dimming when the dipped beams are on after joining pin 10 and 12 together?
And is the static cornering light controlled by the canbus? I see no pins in the headlight connector on pin 13.

You think i have to join the pin 10 to 12 ? I don't retry to connect the new headlight. I will try this this week i know.

[kazas]

Hey thinking about getting rs5 rotors too....i have the s5 rotors 19x9 currently. U reckon u can run them on kw dccs? Or u need bags?

[Mostic]

Hi mate,
What is the part number for the facelift headlights?
I need it for LHD
Thx

[irocman78]

hi Jimijokela

I'm going to mount 9x20 et 35 Rotor (no original)

I see you mountain 9x 20 et 26 (audi original) !!

I tried through Offset configurator but it seems impossible. Or you have to tilt the wheels

Now other other circles 20x 8,5 ET 44 !!

http://www.1010tires.com/Tools/Wheel-Offset-Calculator#" onclick="window.open(this.href);return false;

do you know anyone who mounts Rotor ET 35?

Sorry my english is not good.

[Mostic]

hi Jimijokela

I'm going to mount 9x20 et 35 Rotor (no original)

I see you mountain 9x 20 et 26 (audi original) !!

I tried through Offset configurator but it seems impossible. Or you have to tilt the wheels

Now other other circles 20x 8,5 ET 44 !!

http://www.1010tires.com/Tools/Wheel-Offset-Calculator#" onclick="window.open(this.href);return false;

do you know anyone who mounts Rotor ET 35?

Sorry my english is not good.

I have VMR710 ET35 18x8.5 and fitted without any problem

[irocman78]

hi, Mostic ...yes, any problem for 8,5 ET 35.... but 9 ET 35 , who mounts other wheels ?

I would like to go to Rotor 9 x 20 ET 35 (not Et 26 - Jimijokela) deep concave but I think we are not in the fender

[irocman78]

More...


Untitled by Jimi Jokela, on Flickr

Jimijokela,
you have a photo high 1 or 2 cm high from wheel arches ?