What did you do to your Scirocco today?

[C00PS]

Today i fitted my gloss black / candy white front grille and fog trims



Lee

Is that number plate legal? I mean the size of it because i'm thinking of doing the same to mine.

Sent from my SM-G925F using Tapatalk

[uklee]

Strictly speaking - No

The background height is undersize by about 6mm . The length is oversize to fill the full width of the gap (although this isn't illegal) . The characters are legal size .

I've never been pulled for it , though it's hardly a pisstake being only a few mm undersize in the height

Lee


From my phone

[C00PS]

Strictly speaking - No

The background height is undersize by about 6mm . The length is oversize to fill the full width of the gap (although this isn't illegal) . The characters are legal size .

I've never been pulled for it , though it's hardly a pisstake being only a few mm undersize in the height

Lee


From my phone

Will any where do this for you or did you have to source a company that would say yes to doing it?

Sent from my SM-G925F using Tapatalk

[uklee]

I Found a place that does custom sizes on eBay


From my phone

[C00PS]

I Found a place that does custom sizes on eBay


From my phone

Can you remember the name?

Sent from my SM-G925F using Tapatalk

[uklee]

this the place http://www.replacementregistrationplates.co.uk/

this was my order

TEXT lee 111e -2mm
PLATE CUSTOM 528 x 95
QUANTITIES 1x White

i'd forgotten that i'd done it, but it appears that i went -2mm on the text size .

you can use the webpage to display your design

hope this helps

Lee

[Paddy_R]

I have a similar sized plate to UKLee. I got mine from http://www.fancyplates.com" onclick="window.open(this.href);return false;, was a straight forward procedure with custom size plate. My plate is smaller though at 580mm x 84 and 'font 1' with honeycomb effect. Never had an issue with this plate. Though to be honest 520 x 90 would have been perfect. £14.50 a plate if a custom size.




UKLee as long as you meet these requirements you're fine. There is no max for actual plate size.

Characters
Height 79mm
Width (except the figure 1 or letter l) 50mm
Stroke 14mm
Space between characters 11mm
Space between groups 33mm
Top, bottom and side margins (minimum) 11mm
Space between vertical lines 19

[C00PS]

this the place http://www.replacementregistrationplates.co.uk/

this was my order

TEXT lee 111e -2mm
PLATE CUSTOM 528 x 95
QUANTITIES 1x White

i'd forgotten that i'd done it, but it appears that i went -2mm on the text size .

you can use the webpage to display your design

hope this helps

Lee

Thanks Lee. I'll have a look and make a decision.

Sent from my SM-G925F using Tapatalk

[Irvysan]

VWR Panel filter fitted today.



Sent from my LG-D855 using Tapatalk

[ZebraFcker]

installed a new Milltek turboback exhaust

[Psycho Kirky]

De-activated the DRL's with VCDS finally. If I want lights on, then i'll turn them on! Lol

Sent Via tapatalk

[easyrider]

installed a new Milltek turboback exhaust

looks awesome!

[Irvysan]

installed a new Milltek turboback exhaust

Dat A$$!

[Irvysan]

Lowered With H&R Springs :



New floor mats :

[Roy_01]

De-activated the DRL's with VCDS finally. If I want lights on, then i'll turn them on! Lol

Sent Via tapatalk

I really don''t get this, why manually if you can have it all automatic? Id like to be visible when im driving, always have the lights on drl during daytime. If you want you can code them only to be on with lightswitch in auto positition.

[Psycho Kirky]

Auto always had the lights on during daytime beforehand anyway. To be fair if a driver cannot see another car in broad daylight they should not be driving!

I personally think lights permantly on in daylight is unecessary, I get the safety aspect but being permanently on and the manufacturers manual method for disabling it being disabled itself is also rediculous.

I always use my lights in low light and bad weather conditions anyway like any other car, in daylight id prefer them to be off when set to 0.


Sent Via tapatalk

[Irvysan]

Auto always had the lights on during daytime beforehand anyway. To be fair if a driver cannot see another car in broad daylight they should not be driving!

I personally think lights permantly on in daylight is unecessary, I get the safety aspect but being permanently on and the manufacturers manual method for disabling it being disabled itself is also rediculous.

I always use my lights in low light and bad weather conditions anyway like any other car, in daylight id prefer them to be off when set to 0.


Sent Via tapatalk

Dont disagee with what you say but our friends in brussels have a different view : http://www.theaa.com/motoring_advice/sa ... ights.html" onclick="window.open(this.href);return false;

[Psycho Kirky]

I have heard that most of Europe lawfully requires lights to be on at all times which if I ever took my car to any of those countries I would check local laws before travelling. But the UK isnt Law, otherwise all car would need lights on at all times, not just new ones which ( tend to have better brakes anyway, seems more to do with safety than lights) so I will stick with this. Its not hard to flick the switch over to the right anyway

Sent Via tapatalk

[easyrider]

put speed camera poi on the rns510. can only be helpful, nice one james

[Jojreynolds]

put speed camera poi on the rns510. can only be helpful, nice one james

no problem, least I can do.
Could possibly be needing some of your vcds skills soon if possible?


Instagram: James.reynolds