Page 1 of 1
XENON's
Posted: Sun Nov 06, 2016 1:03 pm
by Tymondo
Hi All,
I find that when the dipped beam is on it's far to low and I would like to raise the beam.
I believe they are self levelling so I assume I can't adjust this at all?
Re: XENON's
Posted: Sun Nov 06, 2016 1:25 pm
by Cuprabob
The reference datum that is used by the self levelling system can be adjusted using VCDS. A lot of people lower their car but do not amend the datum for the Xenon lights meaning they shine too low.
Also worth checking the sensors on the front and rear passenger side wishbones as the rods are prone to damage.
Re: XENON's
Posted: Sun Nov 06, 2016 10:45 pm
by Tymondo
As ever thanks for your hasty and informative reply

Re: XENON's
Posted: Mon Nov 07, 2016 6:48 am
by xjay1337
You dont necessarily need vcds.
Just turn them on and set the height using the allen key adjusters on the headlight.
Mine were awfully low even when my car was stock. Soon sorted that out lol
Re: XENON's
Posted: Sun Nov 20, 2016 10:14 pm
by Tymondo
Cheers for your reply Jay. Cars getting lowered this week coming so might just wait until that's done now