HOW TO: Activate alarm beep
Posted: Mon Jun 22, 2009 7:12 am
Connect VAG-COM / VCDS (I used v805.3 at the time) and select the control module bit
Click on 46-Central Conv.
Click on Coding 07
Click on Long Coding Helper
Select Byte 11 (circled below)
Make sure Bits 0-3 are checked
Now, when you lock the car the indicators will flash and the alarm will beep once to confirm. It isn't particularly loud though, and I haven't figured out how to get the horn to parp instead like on most US cars.
Click on 46-Central Conv.
Click on Coding 07
Click on Long Coding Helper
Select Byte 11 (circled below)
Make sure Bits 0-3 are checked
Now, when you lock the car the indicators will flash and the alarm will beep once to confirm. It isn't particularly loud though, and I haven't figured out how to get the horn to parp instead like on most US cars.
