Scirocco Central

Dazarooni wrote:I spent over 4 hours earlier washing the car. Alloys and bodywork washed, shampoo on bodywork and all purpose cleaner for alloys with a brush. Bodywork and wheels towel dried. Trim gel used on all exterior trim.

Looks super clean!
Good job.

Cheers, it had a winter protection detail a few weeks ago and I've had a fair bit of snow here since and haven't had a chance to clean it until today. I try to wash it every week, weather permitting. I enjoy it!

Piano black air vents went in tonight. Slowly getting there with the piano black trims. Just the door trims now.

Let out a Rocco on the way to work hoping to have a bit of fun. Stuck behind them for the next 10 miles pootling along

retrofit the Bluetooth still to replace the lights to HID

Did some more wrapping because I'm bored [emoji23]

this....

Used some of this today, seems alright and quite popular on here

Sent Via tapatalk

Yeh that's what I use.
Good stuff.
Since using it never had a problem with windows not dropping and freezing shut during winter

Fitted this, and ordered 2x Nokian Z line tyres

Been busy recently, all silver trims are now gloss black, treated the door rubbers to some of that gummi stuff, new wiper blades, r-line darker rear lights and the best bit, got my headlights back and I now have xenons!

gave her a clean, she was filthy!!

Gave mine it's final wash of the year.
It was filthy and needEd cleaning off as I won't have time to do it until mod January. Off to Australia on boxing day.

Walter got a clean, a coat of Sherbert Fizz, and some powermaxxed winter coat plus a quick wheel clean and a slow drive round the block to remove surface rust on the discs - he's very jolly now
Have a great time Down Under Jack - Merry Christmas all

Hi All,
Looking to change my recco head lights to HIDs any Advise/suggestions guys, your help would be much appreciated. Cheers

Installed a Kenwood DNX525DAB headunit.

fitted bonnet gas struts - fairly easy job, pretty sure the bonnet isn't aligned properly now but nothing seems wrong or fouling anywhere - all works. Definitely a mod worth doing.


Sent from my iPhone using Tapatalk

Since installing the xenons I've not been happy with them been on all the time as DRL's. So out with VCDS and a bit programming later, the xenons are no longer DRL's and switched the drl function to the side lights.

Roy_01 wrote:


Installed a Kenwood DNX525DAB headunit.

Today i installed the Kimun1 interface from Kenwood to get the climatronic settings on the screen of the head unit. The dnx525dab is specially made for vag cars. It has a perfect fit. It has the on screen climatronics, pdc, 2 camera inputs. Also steering wheel controls work, and mfa display also showing song/radiostations names now. For the turn by turn signs in the instrument cluster you need VCDS if you didn't had a navigation installation before.
Go to module 19 - can gateway and go to installation list. Now check the box 37.Navigation and save coding. Restart you car and you will have a navigation screen added wich will show the turn by turn signs when you are following a route in you navigation.
For this all to work you wil need a special interface from kenwood CAW-KIMUN1 wich cost 180 euro. This will only work from MY 2010 onwards. My car is build somewhere in June 2009 wich is the MY 2010 version. The unit works with iphone and Android. It's also possible to control your phone with the touchscreen of the radio. You will need an extra cable for that to work. The unit has Garmin navigation software installed on it.
" onclick="window.open(this.href);return false;

Fitted H&R lowering springs and 10mm H&R spacers. Also fitted some new Ring H7 bulbs.