Scirocco Central

The thing is i did read it in the manual when i first got it, but it never really registered LOL

Chungster wrote:

Jane wrote:

Chungster wrote:Amazing! My coming home lights work now. Gotta pull the flasher after ignition off and on door opening lights will come on. Switches off per the delay set in the MFD.

You sure you're not blonde ?..

Well it's not just me that's only realised today!!!

Men don't need to RTFM you see cos we know how to drive a car

My coming home lights work without having to flash lights etc. Leaving home work auto too.

DAR wrote:My coming home lights work without having to flash lights etc. Leaving home work auto too.

Leaving home will cos switch set on Auto, coming home ... well obviously it can be done then ! It is annoying having to flash the lights for it to work.

DAR wrote:My coming home lights work without having to flash lights etc. Leaving home work auto too.

There seem to be some odd changes floating around, i tried to get the big Speed in the MFD today by changing the Instruments to "Rest of the world" but it didnt add a large speedo on mine, and it does on others !

DAR wrote:My coming home lights work without having to flash lights etc. Leaving home work auto too.

Well that's thrown a spanner in the works! Has your coding been changed??

I am tempted to nip out with VCDS lol

182_blue wrote:I am tempted to nip out with VCDS lol

Off you go then.... hurry up we are waiting

Chungster wrote:

DAR wrote:My coming home lights work without having to flash lights etc. Leaving home work auto too.

Well that's thrown a spanner in the works! Has your coding been changed??

I have not changed it. Light switch sat in Auto, and I kn ow they work, as I sometimes curse them when unloading the car post work, and they go off after the period on my DIS (20 secs I think)

Leaving Home work just fine too, I always open car at work when about 50 feet away to marvel at the Xenons...............Sad but true!

My Cent Electric coding.

Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 5K0 937 087 D HW: 5K0 937 087 D
Component: BCM PQ35 H 011 0028
Revision: BE011001
Coding: 46100A389825E10040080080340048E643750B88737D8D60E48040000000
Shop #: WSC 00020 790 00000
VCID: 3667437938C1

Part No: 1K8 955 119 E
Component: Wischer 14110 22 0614
Coding: 009F95

Part No: 1K0 955 559 AH
Component: RLS 221209 05 54 0402
Coding: 0730ED

Part No: 1K8 951 171
Component: DWA-Sensor 00 001 0104
Coding: 000000

Part No: 1K8 951 605
Component: LIN BACKUP HO H10 9003
Coding: 000000

No fault code found.

Dar what does this look like on yours ?

09 Central Electrics module, using long coding helper
- Byte 12 - untick bit 2
- Byte 17 - tick bit 5

DAR wrote:My Cent Electric coding.

Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 5K0 937 087 D HW: 5K0 937 087 D
Component: BCM PQ35 H 011 0028
Revision: BE011001
Coding: 46100A389825E10040080080340048E643750B88737D8D60E48040000000
Shop #: WSC 00020 790 00000
VCID: 3667437938C1

Part No: 1K8 955 119 E
Component: Wischer 14110 22 0614
Coding: 009F95

Part No: 1K0 955 559 AH
Component: RLS 221209 05 54 0402
Coding: 0730ED

Part No: 1K8 951 171
Component: DWA-Sensor 00 001 0104
Coding: 000000

Part No: 1K8 951 605
Component: LIN BACKUP HO H10 9003
Coding: 000000

No fault code found.

Mine

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 5K0 937 087 D HW: 5K0 937 087 D
Component: BCM PQ35 H 011 0028
Revision: BE011001
Coding: 48100A389027E10040080080340048E643550B88736D8D60E48000000000
Shop #: WSC 00020 790 00000
VCID: 36674B9F382F

Part No: 1K8 955 119 E
Component: Wischer 23100 22 0614
Coding: 009795

Part No: 1K0 955 559 AH
Component: RLS 301109 05 54 0402
Coding: 0330ED

Part No: 1K8 951 171
Component: DWA-Sensor 00 001 0104
Coding: 000000

Part No: 1K8 951 605
Component: LIN BACKUP HO H10 9003
Coding: 000000

No fault code found.

that's all techno babble.

Have u tried coding that bit to see if it works??

I did this and now it works as per Dar's :-) (like the Golf used to)

09 Central Electrics module, using long coding helper
- Byte 12 - untick bit 2
- Byte 17 - tick bit 5

182_blue wrote:I did this and now it works as per Dar's :-) (like the Golf used to)

09 Central Electrics module, using long coding helper
- Byte 12 - untick bit 2
- Byte 17 - tick bit 5

excellent.

now i need to find someone local with VCDS lol.

182_blue wrote:I did this and now it works as per Dar's :-) (like the Golf used to)

09 Central Electrics module, using long coding helper
- Byte 12 - untick bit 2
- Byte 17 - tick bit 5

It's so much better than having to flash the headlights. Shame it doesn't work on our Passat CC too.

why wasn't it set like that from the factory???

stupid engineers!!!

I have just tested.

If i open the car, the LH lights activate, if i then lock the car, without opening the door or touching anything, the CH lights stay off.

I have unlock, and switch the ignition on (don't have to start the car) the CH lights activate.

I have not VCDS'd the car, long coding below, if Blue posts his pre and post codes we can do some investigations.

DAR's C/Elect coding: 46100A389825E10040080080340048E643750B88737D8D60E48040000000

Chungster wrote:why wasn't it set like that from the factory???

stupid engineers!!!

I wonder if people got fed up with folk saying "you've left your lights on" when parking up - had that more than a few times when I had my Leon.

Doh! Double post

DAR wrote:I have just tested.

If i open the car, the LH lights activate, if i then lock the car, without opening the door or touching anything, the CH lights stay off.

I have unlock, and switch the ignition on (don't have to start the car) the CH lights activate.

I have not VCDS'd the car, long coding below, if Blue posts his pre and post codes we can do some investigations.

DAR's C/Elect coding: 46100A389825E10040080080340048E643750B88737D8D60E48040000000

Mine is now like that too