turn signal on constantly, vagcom.
-
Cjaay90
- Posts: 10
- Joined: Mon Jun 08, 2015 6:54 am
- I drive a: Scirocco R
- In: Deep Black
- With a: DSG box
Re: turn signal on constantly, vagcom.
Yes, i do have that on my vagcom, but it doesent do anything for me. I guess the scirocco R version have some issues making that happen :S
-
xjay1337
- Posts: 1148
- Joined: Fri Sep 05, 2014 1:03 pm
- I drive a: GT 2.0 TDI 170/184
- In: Rising Blue
- With a: Manual box
- Location: Da Endz, Berkshire
Re: turn signal on constantly, vagcom.
Cjaay90 wrote:Yes, i do have that on my vagcom, but it doesent do anything for me. I guess the scirocco R version have some issues making that happen :S
You will need to have your side lights or dipped beam on for it to work.
-
Cjaay90
- Posts: 10
- Joined: Mon Jun 08, 2015 6:54 am
- I drive a: Scirocco R
- In: Deep Black
- With a: DSG box
Re: turn signal on constantly, vagcom.
That doesent work either, sorry to dissapoint you:P
-
Roy_01
- Posts: 1702
- Joined: Sat Dec 27, 2014 6:51 pm
- I drive a: 2.0 TDI 140
- In: Sumatra
- With a: DSG box
Re: turn signal on constantly, vagcom.
If you can't do it with VCDS it's possible with VCP >MY2010
With VCDS set byte 18 module 9 to 00 eeprom setting.
Then use VCP PQ35 BCM programmer to set indicators to work as stand light with dimming value 14.
When using PQ35 BCM programmer, first save your light settings to have a back up you can always restore.
With VCDS set byte 18 module 9 to 00 eeprom setting.
Then use VCP PQ35 BCM programmer to set indicators to work as stand light with dimming value 14.
When using PQ35 BCM programmer, first save your light settings to have a back up you can always restore.