Page 2 of 3

Re: Aztec Gold - R

Posted: Sat Apr 02, 2016 5:03 pm
by WilloughbyyyR
JUNKMAN wrote:Did the flapper mod to mine as well this morning (how time flies at work when you've got the garage to yourself) ,how does it sound now without the mid box?
Posted a video above mate? Unless the link didn't work?
Sounds good, pops and crackles abit more but not so loud it gets uncomfortable..

Re: Aztec Gold - R

Posted: Sat Apr 02, 2016 5:13 pm
by JUNKMAN
Don't think the link is working (box is just blank)
Looking to do this myself but springs have just turned up so that's my next job
Your colour does look awesome
Cheers

Re: Aztec Gold - R

Posted: Sat Apr 02, 2016 5:43 pm
by WilloughbyyyR
Heres the external link incase the video won't load

" onclick="window.open(this.href);return false;

Re: Aztec Gold - R

Posted: Sat Apr 02, 2016 5:46 pm
by JUNKMAN
Sounds good love the little pops and crackles


Sent from my iPhone using Tapatalk

Re: Aztec Gold - R

Posted: Sat Apr 02, 2016 8:03 pm
by Joe6r
Sounds sweet! Done both to mine and makes a world of difference :) havent had chance to record mine from the rear so its nice to see it in action :yes:

Re: Aztec Gold - R

Posted: Sat Apr 02, 2016 8:17 pm
by WilloughbyyyR
Joe6r wrote:Sounds sweet! Done both to mine and makes a world of difference :) havent had chance to record mine from the rear so its nice to see it in action :yes:
I did it to check it'd worked because you get smoke from both tail pipes, but as soon as it popped like it did i had to upload it :clap:

Re: Aztec Gold - R

Posted: Tue May 24, 2016 8:31 pm
by WilloughbyyyR
So yesterday i got the car lowered on H&R Ultra low coilovers, can't wait to get a few more bits done! Thinking of starting a few engine/engine bay mods next..

Image
Image
Image

Re: Aztec Gold - R

Posted: Wed May 25, 2016 11:58 am
by JUNKMAN
Looks awesome


Sent from my iPhone using Tapatalk

Re: Aztec Gold - R

Posted: Wed May 25, 2016 1:32 pm
by Joe6r
Yes! :hyper: Looks fantastic!!

Re: Aztec Gold - R

Posted: Wed May 25, 2016 2:21 pm
by CandyCupcake
Loving that video! How much does it cost roughly to have the mid resonator deleted and the flapper mod?

Re: Aztec Gold - R

Posted: Wed May 25, 2016 2:26 pm
by WilloughbyyyR
Joe6r wrote:Yes! :hyper: Looks fantastic!!
debating new wheels or maybe keep standards with some spacers next after seeing yours!
CandyCupcake wrote:Loving that video! How much does it cost roughly to have the mid resonator deleted and the flapper mod?

Flapper mod is free, few cable ties and some tape. Mid box removal cost me £70

Re: Aztec Gold - R

Posted: Wed May 25, 2016 2:28 pm
by CandyCupcake
Thanks! Might have to get a YouTube video up for the flapper mod. Does the mid box removal mean a MOT fail?

Re: Aztec Gold - R

Posted: Wed May 25, 2016 4:15 pm
by WilloughbyyyR
CandyCupcake wrote:Thanks! Might have to get a YouTube video up for the flapper mod. Does the mid box removal mean a MOT fail?
Unsure on mot, pretty sure it would fail though? It's easy, few guides on here.. Disconnect the hose and plug the end :rolleyes: I'll try find the forum link later

Re: Aztec Gold - R

Posted: Wed May 25, 2016 7:10 pm
by CandyCupcake
Fab thank you. I must admit I'm not very good when it comes to hands on things so I'll definitely be asking my boyfriend to do it for me!

Re: Aztec Gold - R

Posted: Wed May 25, 2016 7:39 pm
by WilloughbyyyR
CandyCupcake wrote:Fab thank you. I must admit I'm not very good when it comes to hands on things so I'll definitely be asking my boyfriend to do it for me!
http://www.sciroccocentral.co.uk/forum/ ... od#p185049" onclick="window.open(this.href);return false;

Personally i'll disconnect the pipe, plug the end with a screw and put a bit of tape round it to ensure it stays put, then cable tie it up out the way somewhere.. think bending it like shown in the guide could split but its up to you!

Re: Aztec Gold - R

Posted: Wed May 25, 2016 7:43 pm
by WilloughbyyyR
Couple more snaps, not the best quality but show the colour in the sun, even though its filthy! :shrug:

Image
Image

Re: Aztec Gold - R

Posted: Thu May 26, 2016 2:45 pm
by CandyCupcake
WilloughbyyyR wrote:
CandyCupcake wrote:Fab thank you. I must admit I'm not very good when it comes to hands on things so I'll definitely be asking my boyfriend to do it for me!
http://www.sciroccocentral.co.uk/forum/ ... od#p185049" onclick="window.open(this.href);return false;

Personally i'll disconnect the pipe, plug the end with a screw and put a bit of tape round it to ensure it stays put, then cable tie it up out the way somewhere.. think bending it like shown in the guide could split but its up to you!
Thank you for this! Will do it at the weekend if I get a chance. Currently looking for someone who can do he mid box delete for me! :p

Re: Aztec Gold - R

Posted: Thu May 26, 2016 4:47 pm
by C00kie
+1 on the colour...looks awesome! :yes:

Re: Aztec Gold - R

Posted: Fri May 27, 2016 12:32 pm
by GTS_UA
Nice drop! How is the ride comfort?
Some wheel spacers will probably make the look even better;)

Re: Aztec Gold - R

Posted: Fri May 27, 2016 4:09 pm
by WilloughbyyyR
GTS_UA wrote:Nice drop! How is the ride comfort?
Some wheel spacers will probably make the look even better;)
Rides pretty good, rough but that's expected being that low. Don't think I'm going to fit spacers just to save my arches from getting ruined!