Page 8 of 8

Re: Marius Rocco

PostPosted: Sat Sep 12, 2020 5:21 pm
by Roy_01
Wow nice, must be a pleasure to drive after all that hard work!

Re: Marius Rocco

PostPosted: Tue Oct 27, 2020 5:32 pm
by Yoo-Mos
Marius336 wrote:Image

Image

Image


Hi Marius, I love all the hard work you have put into your scirocco, looks like an amazing job.
I have owned my Scirocco for 2 years now and have been collecting parts where I can.
If you can please help me I have 2 questions;
I have a Pre-facelift Scirocco GT 58plate, red mfd and mk5 steering wheel with halogen lights.

1) what do I need to do to change my headlights to Facelift R headlights? I have a pair of genuine facelift R headlights and want to fit them, will it be plug and play and code with vcds?

2) I have a facelift steering wheel with 1k buttons and a 1k0 CH module. I can see the you have soldered wires to some points. Do you have clearer pics of this?

Thanks man

Re: Marius Rocco

PostPosted: Wed Oct 28, 2020 8:22 am
by Marius336
My car is 2011, so i dont know what to do to 2009 car with haedlights.

I have 5k0 steering module, my buttons worked plug and play, i did not solder anything, this pictures i posted i found on the internet.

Re: Marius Rocco

PostPosted: Wed Oct 28, 2020 1:47 pm
by Yoo-Mos
Thanks man!

Did you have to modify or change anything on the headlights to change from halogen to genuine xnenons your 2011?

Re: Marius Rocco

PostPosted: Wed Oct 28, 2020 8:16 pm
by Marius336
yes, xenon adapter for the headlights, change the BCM and retrofit the auto leveling sensor

Re: Marius Rocco

PostPosted: Tue Nov 10, 2020 12:19 pm
by davidscirocco
Marius i need your help. What part number do i need for facelift steering wheel?
I found one that is 1K8419091 and has cruse control buttons? Is that ok? My car is a 2009 but with the first white mfd displays and the newer steering wheel when looking on my obd eleven this is my hardware version 1K0953549CF. Is there something else i much check to see?

Re: Marius Rocco

PostPosted: Wed Nov 11, 2020 7:49 am
by Marius336
All Steering wheels are the same. you only need to change the buttons.

you can take Golf 7/ Passat B8 / tiguan/ Polo.....

you only need the 1k8 959 442 Buttons

Re: Marius Rocco

PostPosted: Wed Nov 11, 2020 8:10 am
by davidscirocco
Ok . So in my case i only need the steering wheel with buttons with the part number you sent me ? And will be plug and play or am i gonna need to solder anything?

Re: Marius Rocco

PostPosted: Wed Nov 11, 2020 1:09 pm
by Marius336
on 1k0 steering need to solder the wire like the pictures i posted

Re: Marius Rocco

PostPosted: Fri Dec 18, 2020 2:16 pm
by Marius336
Image

Image

Re: Marius Rocco

PostPosted: Thu Apr 08, 2021 8:01 pm
by mrsavvy90
Marius, what are you doing to the instruments in this picture ?? I have retrofitted from PFL 2011 R I have these in my car the turbo doesn't show 100% correct as it should on idle mine is 0 and goes to 1.5 bar max on full throttle did you modify yours ?

Re: Marius Rocco

PostPosted: Sat Apr 10, 2021 7:08 pm
by Marius336
on my 1,4 CAXA engine, a chiptuning shop moddify my engine ECU to get to turbo gauge to work.
in my CDL engine, it got flashed to CDLK from facelift, eveyting wokrs like fektory.

The pictures i made, i annable 0-100 Km/h and 1/4 mile messurment inside eprom.

Re: Marius Rocco

PostPosted: Mon Apr 12, 2021 7:51 am
by Marius336
Upgraded my PLA from 2.5 to 3.0

Image

Image

Image

Re: Marius Rocco

PostPosted: Sat Apr 17, 2021 7:04 pm
by Marius336
Replaced my Dashboard with a Facelift one
Image

Image

Image

Image

Image

Image

Image

Re: Marius Rocco

PostPosted: Tue Apr 20, 2021 7:02 pm
by mrsavvy90
very nice I have very smilier setup to you Marius !
when you press the button for parking does it open your camera view or Parking sensor only ?

I ordered the switch do you remember what pin in bcm you connect it to ? thanks

Re: Marius Rocco

PostPosted: Tue Apr 20, 2021 7:24 pm
by Marius336
it only open the parking sensor screen
RVC only open with reverse gear.

Re: Marius Rocco

PostPosted: Tue May 04, 2021 9:33 pm
by mrsavvy90
Marius could you please tell me where to wire up the parking sensor switch please.

thank you <3

Re: Marius Rocco

PostPosted: Wed May 05, 2021 12:36 pm
by Marius336
you have Front PDC sensor?

Re: Marius Rocco

PostPosted: Wed May 05, 2021 10:00 pm
by mrsavvy90
only rear I am going to install front soon ! I have the sensors in bumper just need to buy the wiring loom, do you know where I can buy from ? thanks

Re: Marius Rocco

PostPosted: Thu May 06, 2021 5:57 am
by Marius336