Scirocco Central

Hello! Im trying retrofitting original scirocco R drls on my scirocco non R. Ive changed bcm to 5k0 937 087 AB and did some coding with vcds (byte 27 bit 2, byte 24 bit 7) and when i turn the switch to auto it turns on for 1sec and turns off. When i turned off the switch it turned on about 3-4 sexs ...

I think this have another pin outs cause it has the turn signals into the headlight. Not sure though. I think you need the one that end in 087 AB

All that time I hadn't checked the lights outside the cabin and when I did that yesterday I noticed that both static cornering lights (left + right) switch on when I turn on the high beam. In other words static cornering light operate together with the Bi-Xenon shutters. So the issue after all is t...

Thanks for your help! Will try!

My adaptors have cable on pin 11. Do I need to remove the pin 11 or just make a connection?

Roy_01 wrote: ↑Sat Nov 19, 2022 7:33 pm Just leave that for now and check if your shutters work with the right wiring.

Did the wire bridge between pin 8 and pin 11 on the antaptors and high beam work fine. The cornering lights still turning on when high beams turning on :/

Ok thanks!

Οκ thanks! I saw this coding in the other page. This coding is for midline too? Byte 14 bit 3 check bi-xenon with shutters installed Byte 19 bit 0-3 headlight dimming (bulb extended lifetime) change to inactive Byte 17 bit 2 check bi-xenon without additional high beam installed Byte 25 bit 2 check h...

What is exactly the problem? Yes you have to use the high beam wires from your halogen units to operate your shutters. Pin 8 from the halogen connector is connected to pin 11 on the 14 pin connector for high beam operation, no coding needed. Thanks for your reply. My problem is that I coded only “x...

Depends on what functionality you want... Without a highline bcm ending with 087, you can only get the xenon working without static cornering lights. WIth a midline bcm ending on 086 it's possible to use the high beam output of the bcm T52a/5 and T52c/46 for the shutters to get them working. On a h...