Page 1 of 1

DCC Switch Blinking

Posted: Thu Jun 10, 2021 7:29 pm
by amcridge
Using a 'Snap On Solus Edge tester' it showed 2 faults.

00776 Level control system sensor Left Front (G78) Open Circuit/Short With Power.

01769 Sensor for Vehicle Levelling Front Right (G289) Open Circuit/Short With power.

1. Has anyone had the same or similar problem?

2. What was the solution please?

TIA

Re: DCC Switch Blinking

Posted: Thu Jun 10, 2021 7:31 pm
by Juppy14109
Hi, I had a similar problem and if you look behind the back of the wheel there is a little plastic ball ball and socket joint on a arm mine had come off..... I took the wheel off reattached with a little grease and had no problems since, hope this helps

Sent from my SM-G986B using Tapatalk

Re: DCC Switch Blinking

Posted: Tue Jun 15, 2021 4:41 am
by amcridge
Thanks for the suggestion. I've examined both units. They look OK.

1. Does this particular circuit have a fuse?

2. What's the best method to test them with an electrical meter?

3. Is it likely that both would fail at the same time?