Scirocco Central

Any expert here can tell me how this works ?

Anybody ?:)

I think the turn signal connector will fit but not the side light wire. You need to install the right connector on your car wiring. Just buy the right one at vw.

You know what kind of connector i need ?

I can't solder it together?

Just the contra connector that fits in, isn't there a part number on the connector?
http://www.passatplus.de/umbauteile/ste ... ecker2.htm" onclick="window.open(this.href);return false;
Or soldering is also possible.

Roy_01 wrote:Just the contra connector that fits in, isn't there a part number on the connector?
http://www.passatplus.de/umbauteile/ste ... ecker2.htm" onclick="window.open(this.href);return false;
Or soldering is also possible.

Going to solder it

Is it like this red is connected and green is solder ?

I don't have it on paper but just tried out with a 12v adapter what combination worked to figure out how it must be connected.

Got it working

But the bumper wont snap on need those new brackets and foam piece
Old 1 blocks the bumper at some place

http://www.sciroccocentral.co.uk/forum/ ... ce#p198808" onclick="window.open(this.href);return false;

So i need parts
1K8807248F - foam piece

1K8 807 183 C - side bumper supports
1K8 807 184C

1K8 805 813 C plastic piece underneath the bonnet lock
1K8 805 567 B metal lock support

What model year do i need to tell them it's from to get the correct items ?

And is there a special numberplate holder for the bumper aswell ?
1 Like yours

These are the parts needed for facelift R bumper, you don't need a modelyear number.
I recommend also changing the mud flaps/wheel arch flaps the part numbers are also in that topic.
I bought my number plate holder at an auto shop, its not from VW.

Guess i have to get those aswell then

Will it make for a perfect fit ?

Sweet getting all the missing parts in 2 Days