OBDEleven on way .. help please

[Jacko5]

Ok i have a OBDEleven on its way to me.
I want to disable the DRLs and don't have a clue how to do it.
This is the plan.
1. Disable the DRLs.
2. When the LIGHT SWITCH is in the 0 position all lights OFF.
3. Have Auto Lights as they are meant to be, AUTO SWITCH ON and lights only come on when its dark.
4. When the LIGHT SWITCH is in the side light position ... rear, front lights as side lights as they are now with also the small lights it the front bumper on ( like when DRLs are on ).
Hope the above makes sense .
Thanks for any replies.

[Roy_01]

You can also disable drl with lightswitch in off position.
Only works in auto position then but you want to disable full functioning?

[Jacko5]

You can also disable drl with lightswitch in off position.
Only works in auto position then but you want to disable full functioning?

Hi,
Yes thats what i have said above, lights all off in 0 position and auto position to work as it should be,lights on when it gets dark.

I found these commands,not sure what they mean yet,

Emergency Break/Flashing Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 16
Bit 1 Activate
Bit 2 Activate
Byte 23
Bit 5 Activate

Rain Close
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 4
Bit 5-6 Activate
Seçim Control unit 09 (Central Electrics)
Control unit Long Coding
RLS Sub Selection
Byte 0
Bit 2 Activate

Sync Mirrors
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 8
Bit 6 Activate

Cornering Lights with Fog-2010 and later
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 7 Activate
Byte 12
Bit 4 Activate

Cornering Lights with Fog-2009 and before
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 23
Bit 2-Bit 3-Bit 4 Activate

Locking Door up to 15 km/h
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 0
Bit 2 Activate

Unlocking Door when Stop the Car
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 0
Bit 1 Activate

Activation of Coming Home/Leaving Home-2010 and after
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 12
Bit 2 DeActivate
Byte 17
Bit 5 Activate

Activation of Coming Home/Leaving Home-2009 and before
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 23
Bit 5 DeActivate

Coming Home/Leaving Home with Fog Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 17
Bit 3 Activate

Lock Acknowlegde with Horn
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 1-Bit 4 Activate
Adaptation
Channel 10-Sound when unlocking
Value=1
Channel 11-Sound when locking
Value=1

Disable Seat Belt Warning
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 1
Bit 1 DeActivate

Activation of Tear Wiping
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 1
Bit 3 Activate
Byte 21
Bit 4 Activate

US Parking Signals
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 07
Value 28

XDS Activation
Select Control unit 03
Control unit Long Coding
Byte 17
Bit 3 Activate

XDS Adjustment
Select Control unit 03 (ABS)
Adaptation
Select: Expanded Electronic Differential Lock
Options: Weak-Normal-Hard

Pointer Test
Select Control unit 17 (Dashboard)
Control unit long coding
Byte 1
Bit 0 Activate

[Cuprabob]

I think most of the above listed are self - explanatory and some of the items can already be changed if you have highline MFD.

Pointer Test - Needle Sweep
Rain Close - Close windows and Sunroof if rain sensor detects rain.
Tear Wipe - After using washers a delayed final wipe to clear screen
Sync Mirrors - When you adjust driver's mirror passenger mirror automatically compensates.
Emergency Brake / Flashing Lights - During emergency stop brake lights and hazards flash
XDS - electronic different control and setting.

[Roy_01]

I think most of the above listed are self - explanatory and some of the items can already be changed if you have highline MFD.

Pointer Test - Needle Sweep
Rain Close - Close windows and Sunroof if rain sensor detects rain.
Tear Wipe - After using washers a delayed final wipe to clear screen
Sync Mirrors - When you adjust driver's mirror passenger mirror automatically compensates.
Emergency Brake / Flashing Lights - During emergency stop brake lights and hazards flash
XDS - electronic different control and setting.

I tried the brakelight flashing a time ago but it doesnt work on my MY10, only the hazardlight flashing works. Im not sure that the pointertest byte 1 bit 0 coding is correct i thought it was an adaptation channel indicator celibration or staging.

[Roy_01]

FYI: Module 17 byte 1 bit 0 is brakepad warning active

[chelspeed]

Isn't it OBDII? OBD2, ie a Roman 2 rather than Eleven? Or is OBDEleven a trade name?

[Cuprabob]

Isn't it OBDII? OBD2, ie a Roman 2 rather than Eleven? Or is OBDEleven a trade name?

Trade Name

[Jacko5]

Right i sussed it out.
For anyone who wants to use a OBDEleven gadget here is the info for DLR Disable

I found out how to disable DLR Lights in my 2009 Scirocco.

central electrics
long coding
byte 0
bit 03 untick

What this does is,

light switch position
0 ... all lights off
auto .... lights as they should be .. off in the day .. active when dark.
side light ... rears on ..front only lights under bumper on .. no headlights on at all.

Hope this helps someone.
Will post more codes for OBDEleven when i suss any out.

[Jacko5]

Further to this thread...

My brakes are very keen and i have done Brake Assist from normal to weak.
I have also seen that brake boost is enabled i have tried to disable this but need a access code .. does anyone know the access code for my 2009 Scirocco ?
Or a way to find it ?
Thanks.

Edit,
I have just been out in the car.. the brakes are much better with weak position on brake assist setting.
So anyone who thinks there brakes are to keen try the above.
I still need access code help though.

[Roy_01]

Why do you want to disable the brake boost? Then you have to perform very much force to get a good braking.
I like the keen braking and put it to strong, so it reacts very quick and i don't have to push in the pedal so far.
But it's personal taste how you want to set it up. I don't have the security acces code, searched for them on the internet but haven't found anything yet.

[Jacko5]

Why do you want to disable the brake boost? Then you have to perform very much force to get a good braking.
I like the keen braking and put it to strong, so it reacts very quick and i don't have to push in the pedal so far.
But it's personal taste how you want to set it up. I don't have the security acces code, searched for them on the internet but haven't found anything yet.

Cheers
I will not do brake boost thing.
If you find access code let me know

[Quinnaay]

could do with some help, i went in to the settings to disable DRLS unticked bit 3 and now my central electrics module isnt responding cant even go back to alter and and nothing changed with regards to the DRLS.

[ridavey]

Further to this thread...

My brakes are very keen and i have done Brake Assist from normal to weak.
I have also seen that brake boost is enabled i have tried to disable this but need a access code .. does anyone know the access code for my 2009 Scirocco ?
Or a way to find it ?
Thanks.

Edit,
I have just been out in the car.. the brakes are much better with weak position on brake assist setting.
So anyone who thinks there brakes are to keen try the above.
I still need access code help though.

Did you find the access code?

Sent from my SM-G935F using Tapatalk

[ridavey]

Why do you want to disable the brake boost? Then you have to perform very much force to get a good braking.
I like the keen braking and put it to strong, so it reacts very quick and i don't have to push in the pedal so far.
But it's personal taste how you want to set it up. I don't have the security acces code, searched for them on the internet but haven't found anything yet.

Cheers
I will not do brake boost thing.
If you find access code let me know

Did you find the code?

[Jacko5]

Sorry no i did not.
Not messed with obd for a while.