Page 1 of 1
Saskia's build thread
Posted: Sat May 23, 2015 11:54 pm
by Jojreynolds
Hi,
first off im james and been a member of the forum for a while now but haven't posted much or been too involved, iv used the forum a fair bit for ideas and advice so thought id give something back and do i build thread to where i am now.
meet Saskia, i bought her on 1st of January 2013 after searching for the right spec for over 6 months.
Re: Saskia's build thread
Posted: Sun May 24, 2015 12:13 am
by Jojreynolds
First thing I did when getting home from the 250 mile trip to pick her up was to change the halogen DRL's to LED ones.
Sent from my iPhone using Tapatalk
Re: Saskia's build thread
Posted: Sun May 24, 2015 12:32 am
by Jojreynolds
After a long wait due to saving up for a mortgage and moving house, I finally had some money to burn and started the mods.
Next on the list was to get it lowered, after looking around at different options, coilovers and air wasn't what I wanted to bought myself a set of H&R springs

From iPhone
Re: Saskia's build thread
Posted: Sun May 24, 2015 12:36 am
by Jojreynolds
Now the car was sitting better I had the wheels refurbished as I'd given up on finding a set of savannahs and my inters were in need of some tlc.
I changed the colour to gloss black as Iv always liked the black on white look so as it's no extra cost went for it.
Put a before and after of the springs on to show the difference.

From iPhone
Re: Saskia's build thread
Posted: Sun May 24, 2015 2:04 am
by Jojreynolds
My next mod I know is very hit and miss on this forum, it's a marmite mod and that's for sure. I personally love the look of the cup spoiler as it gives the rear of the car some personality and it's also pretty rare as I personally haven't seen many around.
A friend of mine does carbon skinning (well did) and he owed me a huge favour so as payment he sinned the cup spoiler for me which I love. It's one of my favourite mods and catches everyone's eye who spots it.


From iPhone
Re: Saskia's build thread
Posted: Sun May 24, 2015 7:52 pm
by lesvw123
The finish on that spoiler is top notch looks awesome it would look good with bottom part of your rear diffuser carbon wrapped or if your mate could do it in carbon coating
Re: Saskia's build thread
Posted: Sun May 24, 2015 7:57 pm
by Jojreynolds
lesvw123 wrote:The finish on that spoiler is top notch looks awesome it would look good with bottom part of your rear diffuser carbon wrapped or if your mate could do it in carbon coating
Cheers. Yeah the finish is flawless, I was a little sceptical at first but really love the look and wouldn't go back.
From iPhone
Re: Saskia's build thread
Posted: Sun May 24, 2015 7:58 pm
by Jojreynolds
I'll upload more progress when have some time. Car has changed a lot since the spoiler.
Instagram: James.reynolds
Re: Saskia's build thread
Posted: Sun May 24, 2015 7:59 pm
by lesvw123
This is my old roc with the diffuser wrapped

Re: Saskia's build thread
Posted: Sun May 24, 2015 8:02 pm
by Jojreynolds
lesvw123 wrote:This is my old roc with the diffuser wrapped

I that a lot, was it hard to do? I always thing I'll never get a good straight finish on the bodywork.
Instagram: James.reynolds
Re: Saskia's build thread
Posted: Sun May 24, 2015 8:04 pm
by lesvw123
I got a local guy to do it about an hours work it was a pain to do but it did make the rear a lot better
Yeh your car has changed and it looks the dogs boll---s
Re: Saskia's build thread
Posted: Sun May 24, 2015 8:52 pm
by StevieP
Hi. What LED bulbs are you using in your DRL's? Any bulb alarms. Car looking good.
Re: Saskia's build thread
Posted: Sun May 24, 2015 9:30 pm
by Jojreynolds
StevieP wrote:Hi. What LED bulbs are you using in your DRL's? Any bulb alarms. Car looking good.
It was a while ago but looking at them they looked like this and no error codes.
http://pages.ebay.com/link/?nav=item.vi ... 1435160551" onclick="window.open(this.href);return false;
Instagram: James.reynolds
Re: Saskia's build thread
Posted: Sun May 24, 2015 9:32 pm
by StevieP
Thanks :-)
Re: Saskia's build thread
Posted: Wed May 27, 2015 6:20 am
by Jojreynolds
Re: Saskia's build thread
Posted: Wed May 27, 2015 7:49 am
by Phil
Your putting some people to shame with all your hard work

Re: Saskia's build thread
Posted: Fri May 29, 2015 12:44 am
by Jojreynolds
Next mod that went on was a front splitter. By coincidence philjay92 on this forum also ordered the same one so would have been rude to not have a car day and fit them. This was the splitter when it came and I give it a few coats of gloss black and lacquer before fitting

Quick trial fit before self tapping screws and rivets
This is the final result, I didn't want it sticking out too far so fitted it nearly flush with the front bumper.
So easy to instal and finished the front off nicely.

Instagram: James.reynolds
Re: Saskia's build thread
Posted: Sun Jul 19, 2015 10:06 pm
by easyrider
couple of pics of saskia from the other night:
