Scirocco Central

Hey guys,
I was wondering if anyone has got the error below before. I think this is the second time it's popped up on VCDS for me. I dont get any Engine management lights, I just discover the error when I log onto VCDS. Any help will be appreciated


_______________________________________________________________________________________________________
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
77-Telephone -- Status: OK 0000

Address 01: Engine (CCZ) Labels: 06J-907-115-CCZ.clb
Part No SW: 5K0 907 115 HW: 1K0 907 115 AA
Component: 2.0l R4/4V TFSI 0050
Revision: AAH16--- Serial number:
Coding: 0403000C18070160
Shop #: WSC 66565 257 00032
VCID: 67F3599E569CB719CF5-8032
---------------------------------------------------------------------------------------------------------------
1 Fault Found:
001089 - EVAP Emission Control Sys
P0441 - 000 - Incorrect Flow - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 72933 km
Time Indication: 0
Date: 2015.03.15
Time: 10:34:27

Freeze Frame:
RPM: 747 /min
Load: 20.8 %
Speed: 0.0 km/h
Temperature: 80.0?C
Temperature: 10.0?C
Absolute Pres.: 1020.0 mbar
Voltage: 14.224 V

Readiness: 0000 0000

Possible Causes

Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) faulty/jammed
Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115) faulty/jammed
Evaporative Emission (EVAP) Canister Sealing faulty
Pipes between Tank Breathing and Throttle Body leaky/blocked

Possible Solutions

Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
Perform Output Test
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115)
Check Evaporative Emission (EVAP) Canister
Perform Basic Setting
Check Pipes between Tank Breathing and Throttle Body

I have read that up on the Ross-tech website: It's a bit hard to decipher due to multiple causes.