Scirocco Central

Hi All,

Great to know this forum and all the cool people with great info here

I have been slowly kitting up my roc now and it has been about 9 months since I owned the car (Bought 2nd Hand from a local car dealer)

Sharing some pics over the next post on how the ride transformed into what it is today

Cheers~

#xh

xiaohong wrote:Hi All,

Great to know this forum and all the cool people with great info here

I have been slowly kitting up my roc now and it has been about 9 months since I owned the car (Bought 2nd Hand from a local car dealer)

Sharing some pics over the next post on how the ride transformed into what it is today

Cheers~

#xh

As promised...

Day i laid my hands on the roc with some face lift on same day

[attachment=-1]uploadfromtaptalk1392093247798.jpg[/attachment]

Out goes the old wheels and pads making way for new ones

[attachment=-1]uploadfromtaptalk1392093300050.jpg[/attachment]

After a good clean and night

[attachment=-1]uploadfromtaptalk1392093361994.jpg[/attachment]

LED Tail Lights

[attachment=-1]uploadfromtaptalk1392093394700.jpg[/attachment]

Lights On!

[attachment=-1]uploadfromtaptalk1392093426081.jpg[/attachment]

Base dyno run to get a moment of truth

[attachment=-1]uploadfromtaptalk1392093458556.jpg[/attachment]

There she is.....

[attachment=-1]uploadfromtaptalk1392093664826.jpg[/attachment]

More pics loaded for the slow steps I have taken so far....

The once very OEM look car felt like she needed some attention on the roads

The last portion of remaining OEM until I did a base dyno run to see the OEM results.....not very appetizing though



Slapped on some stickers as well while in the midst of getting the car done up internally and externally as well





Popped out the engine to re-look into it and clean every single possible part and also replace all parts that are due including enhancing them







Preparing for the new hybrid turbo with up-rated actuator for high boost





Removing the Dbilas intake due to lack of air at the high rpm range

Upgraded stopping power



OEM Turbo vs. Hybrid Turbo (Rated more than 300HP)

S3 Intercooler but it has been swapped to a CTS Turbo Intercooler now



A nice downpipe to compliment



Rigid Collars





V3 Coilovers



H&R Anti Roll Bars



Spacers to look WIDE 15mm front and 20mm rear

Shit happens



Slapped on some stickers for a fierce looking Roc! hahaha!





DIY Engine Bay

Needed more cooling features



One of the best Engine Oils so far that I have tried on various cars



Re-Did the engine bay design with a diamond black spray engine cover and changed to a CTS open pod intake



Brembos with Wheels



Throwing out the old rings and making way for new components to ensure proper compression and also no leaks

Nice clean engine head.....still pretty shiny



Diamond Sparkle Engine Cover

Just Saying #xh



New Paddle Shifter Extensions



R foot pedals anyone?



Carbon Fiber Bonnet Sprayed to Candy White for a subtle effect....

Needed a VCDS on my own at ALL times......

Wow, really interested in your car Have you already done all mods? How many HP you have pushed from 1.4TSI?

nice!

Nice mods uve done there :0 looking forward to see the rest ^^

Very nice, engine stripped out and rebuilt. I like it.
How much availability of tuning parts is available in Singapore with so expensive? I see you have your hands on some nice parts so it can't be too bad.
I have found a MTM dealer not too far from my home i will visit when i get back from work in couple of month. No engine rebuild, but hope fully a reprogrammed ECU.

Keep the good work and post more pictures.

Mishaw wrote:Wow, really interested in your car Have you already done all mods? How many HP you have pushed from 1.4TSI?

Its 223bhp on wheels now

Minnu wrote:nice!

Thks

finetrond wrote:Very nice, engine stripped out and rebuilt. I like it.
How much availability of tuning parts is available in Singapore with so expensive? I see you have your hands on some nice parts so it can't be too bad.
I have found a MTM dealer not too far from my home i will visit when i get back from work in couple of month. No engine rebuild, but hope fully a reprogrammed ECU.

Keep the good work and post more pictures.

Tuning in Singapore is not overpriced. Availabilty of parts are minimal and usually shipped over from overseas. But consolation is there is local dustributor for some parts which makes it easier.

All the best in your ECU programming. It's pure joy when done