Scirocco Central

I did RNS SW update;















It works [emoji4]

Hi.
How is your cluster ?
i see you have issue with BULB out ERROR , Parking Brake and Washer fluid indicatior .
that 3 Indicators are not match when you swap old RPM disc to new Hardware board
but can be fix easy
let me know here cluster details such as P/n and SW number (post it from autoscan)

spacewalker wrote:Hi.
How is your cluster ?
i see you have issue with BULB out ERROR , Parking Brake and Washer fluid indicatior .
that 3 Indicators are not match when you swap old RPM disc to new Hardware board
but can be fix easy
let me know here cluster details such as P/n and SW number (post it from autoscan)

Hi Man,
The cluster is working fine, only have the issue you mentioned above.
Here are the details from auto scan.

Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 1K8 920 884 HW: 1K8 920 884
Component: KOMBI H05 0506
Serial number: 00000000000000
Coding: 170E01
Shop #: WSC 08232 013 104857
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 004716
ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
VCID: 73A61F8ADA51ABDAB1-8026

Thanks in advance...

send me eeprom and i will fix this for you
of course you should also replace RED to Yellow LED where is now BUL OUT error indicator
but you can keep RED of course .
In a fact ....to be closer manufacture BULB OUT error should be yellow , not RED
Also look where is now Washer FLUID INDICATOR ... because is wrong too
take a look below

spacewalker wrote:send me eeprom and i will fix this for you
of course you should also replace RED to Yellow LED where is now BUL OUT error indicator
but you can keep RED of course .
In a fact ....to be closer manufacture BULB OUT error should be yellow , not RED
Also look where is now Washer FLUID INDICATOR ... because is wrong too
take a look below

Hi mat
I just got the eeprom, how can I send to you?
Thanks in advance

Cluster wrong bulbs has been fixed
Thanks a million to spacewalker for his wonderful support in order to fix it.

Very nice fix, would love to see/read more how this has been done.

Roy_01 wrote:Very nice fix, would love to see/read more how this has been done.

I don\t know how he did but he did

I bought this camera yesterday from a friend and plan to install by weekend.
more is coming, stay tuned

Mostic wrote:Cluster wrong bulbs has been fixed

Fixed Hybrid Cluster 02.jpg

Thanks a million to spacewalker for his wonderful support in order to fix it.

to make your cluster to be closer to Genuine , you should replace one led
bulb out indicator is YELLOW , and now you have RED because previously was a hand Brake Indicator

Preparing the 2.0T FSI engine in my MKV to be moved later to the Rocco

So, 2.0T FSI engine modification started last week:











Testing valves leakages:

https://vimeo.com/202548592

Done...



Thanks a million to my bro Dr. Khaled [emoji8]

Preparing the 2.0T FSI engine in my MKV to be moved later to the Rocco

So, 2.0T FSI engine modification started last week:











Testing valves leakages:

https://vimeo.com/202548592

Done...



Thanks a million to my bro Dr. Khaled [emoji8]

Yesterday I checked the progress and we are here now...











Stage8 locks have been installed...





Modified the OEM bracket in order to support the GTX and to avoid the unnecessary movement that could lead to leakage.







IE valve cover installed



I guess this oxygen sensor #1 is too far from the correct place, right?



As far as I know it should be very close to the housing like the below pic, right?

Cool Photos, not ground valves like that in decades lol and that was a 2 Pot lol!

Technane wrote:Cool Photos, not ground valves like that in decades lol and that was a 2 Pot lol!

Thanks
Hopefully the valves and all engine can provide the planed power!

Guys, what do you think about this manifold?
I am thinking to use it instead of the IE one. I found someone selling it in forums (I don't remember which forum) but I will check the history if I decided to go for!

Dynaudio wiring cables received today from taobaovw.com



I will replace the existed handmade dynaudio wiring I have now with this one.
Also, will install the rear camera too.

Updates soon, stay tuned!

Dynaudio wiring cables received today from taobaovw.com



I will replace the existed handmade dynaudio wiring I have now with this one.
Also, will install the rear camera too.

Updates soon, stay tuned!

Liking the hard work on this. What turbo is that?

hmm Taobao VW, do they deliver into EU?

I loved Taobao when I was living in Shanghai, but was well aware many of the sellers refused to ship to the UK.