Scirocco Central

Very hard to explain on a forum how to fit but it really is a simple job. I'm in essex not sure where you are but if you're local I'm happy to give you a hand!

Hi Lake6190

I´m far away, I´m from Argetina.
but thank you very much for the interest anyway. :-)

Hello mate,

I've been looking at your reverse sensor parking write up...very informative btw!

Inspired by your installation I ordered an OEM kit from a breakers near to me. I asked them for everything I needed but I'm pretty sure they haven't.

They sent me the following:-

1KO 919 475K
1K8 971 104E (this is the complete wiring loom including the sensors)

What I don't have is the buzzer, which I'll contact them for as this said to be included. If you don't mind can you please let me know if there's anything else that I need?

FYI I'm not carrying out the full installation to the head unit...I'm happy with just the audible sensors

Pricey67 wrote:
They sent me the following:-

1KO 919 475K
1K8 971 104E (this is the complete wiring loom including the sensors)

What I don't have is the buzzer, which I'll contact them for as this said to be included. If you don't mind can you please let me know if there's anything else that I need?

FYI I'm not carrying out the full installation to the head unit...I'm happy with just the audible sensors

Hi Pricey67

Did you manage to get this install done? - looking at doing same thing and have all, apart from some plug adapters and a cable to connect the oem sensor loom to the to the control unit.

Like to discuss in bit more detail if possible - did you connect to blue black wire and what side did you connect this on

Cheers pal
Andy

Lake6190 wrote:Very hard to explain on a forum how to fit but it really is a simple job. I'm in essex not sure where you are but if you're local I'm happy to give you a hand!

Would it be possible if you could kindly tell me about wiring up everything, bought a rear parking sensor kit and having a bit of trouble understanding how to wire it up before i actually go hands on.

Hello all,

I hope this does not drift away from the initial topic, but I was wondering if anyone can advise where is the stock beeper located at?

As I run a check my reverse sensors is working but it no longer beep after I re-wrap my headliner.

Many thanks in advance!

Mine is located on the O/S (RHD) drivers side (UK) rear C pillar, so if you have removed your headlining it is possible the cable has been knocked.

Hello iforland,

I have tried tearing down a bit of my headliner, all I can find was two connector connecting to the rear center brake light. Mine is also RHD (from Singapore). Is there anything I'm missing out? What's a O/S BTW?

Hi there...sorry "O/S" - Off Side (the side of the car furthest from the curb).

This is the best photo I could find, taken from in the boot (rear of the car to the right)
I've circled the buzzer in red (it is just above the rear seat belt)