Page 2 of 2

Re: Inlet manifold sensor failure, £600 to replace!?

Posted: Wed Sep 18, 2019 1:16 pm
by J37F1R3
"They finally made a revised part for the intake manifold with a new design for the actuator arm and a different position sensor.
Part number: 06J133201BH
So ask VW if you get this part and not the old version."

Hi All will the above manifold as mentioned by roy_01 fit my SCIROCCO GT 2009 2.0 TSI?

Thanks in advance

Re: Inlet manifold sensor failure, £600 to replace!?

Posted: Thu Sep 19, 2019 10:16 am
by Paradox1
im guessing so as only the TSI 2.0 engines has this fault. the scirocco R used a rod arm instead of accuator