Page 2 of 7
Re: My Rocco project
Posted: Fri Jan 09, 2015 12:00 am
by SPEEDDRV
Alright boys, hang on!! I found two kits on a portuguese website of used stuff. I have turbine wheels 18" 235/40.
I found a TTRS kit for 650€. Is it straight on or do I need adapters? Here is the link:
http://aveiro-aveiro.olx.pt/travagem-rs ... -442365893" onclick="window.open(this.href);return false;
I'm just scared because it's used and I never buy used parts.
I also found a 6 Pot Porsche 18Z calipers and some 350mm Pagid discs (not grooved or drilled, normal ones) and pads for 650€. Here is the link:
http://barreiro-setubal.olx.pt/kit-trav ... -469531806" onclick="window.open(this.href);return false;
Please, give me your advice. What should I do? 18Z are near me. I can meet the guy next week easily. Also, he says it's 5x112. What does it mean? Is TTRS 5x112 too?
Tell me everything about this two brake kits.
Thank you guys.
Re: My Rocco project
Posted: Fri Jan 09, 2015 12:20 pm
by xjay1337
6 pots are too many, pedal will be long.
Re: My Rocco project
Posted: Fri Jan 09, 2015 12:57 pm
by SPEEDDRV
What does it mean buddy? I'm sorry but I have no knowledge about this. I also have a Mercedes W211 and only changed the rims eheheh
Re: My Rocco project
Posted: Thu Jan 15, 2015 6:35 pm
by tommoporter47
How easy were the plastics to take out dude? just a case of get something in the corner and lever it out or do you have to start at a certain point? if anyones got a guide id appreciate it.
Re: My Rocco project
Posted: Fri Jan 16, 2015 9:52 am
by Karlos
Your exhaust has now tempted me to get one.
Is it quiet inside?
And where did you get yours from?
Re: My Rocco project
Posted: Fri Jan 16, 2015 4:38 pm
by RoccoDav
tommoporter47 wrote:How easy were the plastics to take out dude? just a case of get something in the corner and lever it out or do you have to start at a certain point? if anyones got a guide id appreciate it.
Hello um was totally guess work really but I did borrow mates plastic lever I broke two clips which wasn't to bad,
One round the cd surround and a door one but think it's gunna fine. You have to take ya time really.
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Fri Jan 16, 2015 4:40 pm
by RoccoDav
Karlos wrote:Your exhaust has now tempted me to get one.
Is it quiet inside?
And where did you get yours from?
Yea it's fine inside the car not to loud at all! My old civic had the same that was loud. But scirocco seems to have better sound proofing I guess.
I got it from a performance garage near where I live called " A Reeve performance" good price including fitting.
Also sounds even better now!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Fri Jan 16, 2015 6:12 pm
by Karlos
RoccoDav wrote:Karlos wrote:Your exhaust has now tempted me to get one.
Is it quiet inside?
And where did you get yours from?
Yea it's fine inside the car not to loud at all! My old civic had the same that was loud. But scirocco seems to have better sound proofing I guess.
I got it from a performance garage near where I live called " A Reeve performance" good price including fitting.
Also sounds even better now!
Sent from my iPhone using Tapatalk
Awesome that's good to hear that someone has got one and it's ok, bit wary buying an exhuast system and it being silly noisy inside.
Fitting is not a problem for me.
I was looking at this one, is it the same?
http://www.demon-tweeks.co.uk/performan ... tail-pipes" onclick="window.open(this.href);return false;
Re: My Rocco project
Posted: Sat Jan 17, 2015 2:12 pm
by RoccoDav
Karlos wrote:RoccoDav wrote:Karlos wrote:Your exhaust has now tempted me to get one.
Is it quiet inside?
And where did you get yours from?
Yea it's fine inside the car not to loud at all! My old civic had the same that was loud. But scirocco seems to have better sound proofing I guess.
I got it from a performance garage near where I live called " A Reeve performance" good price including fitting.
Also sounds even better now!
Sent from my iPhone using Tapatalk
Awesome that's good to hear that someone has got one and it's ok, bit wary buying an exhuast system and it being silly noisy inside.
Fitting is not a problem for me.
I was looking at this one, is it the same?
http://www.demon-tweeks.co.uk/performan ... tail-pipes" onclick="window.open(this.href);return false;
That's a good price mate! That sounds like the one too!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Mon Feb 02, 2015 3:50 pm
by RoccoDav
My splitter arrived today at work, quick mock up and fits superb! Going to look awesome I think!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Mon Feb 02, 2015 3:50 pm
by RoccoDav
My splitter arrived today at work, quick mock up and fits superb! Going to look awesome I think!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Mon Feb 02, 2015 4:12 pm
by Peter G
Karlos wrote:RoccoDav wrote:Karlos wrote:Your exhaust has now tempted me to get one.
Is it quiet inside?
And where did you get yours from?
Yea it's fine inside the car not to loud at all! My old civic had the same that was loud. But scirocco seems to have better sound proofing I guess.
I got it from a performance garage near where I live called " A Reeve performance" good price including fitting.
Also sounds even better now!
Sent from my iPhone using Tapatalk
Awesome that's good to hear that someone has got one and it's ok, bit wary buying an exhuast system and it being silly noisy inside.
Fitting is not a problem for me.
I was looking at this one, is it the same?
http://www.demon-tweeks.co.uk/performan ... tail-pipes" onclick="window.open(this.href);return false;
Sorry to jump in on your thread:
Miltek exhaust's sound great and well worth it. I Have just listed mine for sale if your interested Karlos.
The colour of your calipers are wicked, car is going to look great with that splitter. Happy Modding.
Re: My Rocco project
Posted: Tue Feb 03, 2015 11:53 pm
by Albrown59
Any side on photos of the whole car to see wheels and calipers?
Re: My Rocco project
Posted: Thu Feb 05, 2015 11:20 am
by sc cal
Hey,
Nice car mate

what kind of splitter is that?
Re: My Rocco project
Posted: Thu Feb 05, 2015 7:10 pm
by Karlos
I brought my milltek already Peter G but thanks.
RoccoDav I've got the same splitter, makes the car I think.
Re: My Rocco project
Posted: Sun Feb 08, 2015 1:00 pm
by RoccoDav
Sundays are car cleaning and splitter fitting!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Thu Mar 05, 2015 10:58 am
by RoccoDav
Couple of pictures of my car now lowered on BC COILOVERS!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Thu Mar 05, 2015 10:59 am
by RoccoDav
Couple of pictures of my car now lowered on BC COILOVERS!
Sent from my iPhone using Tapatalk
Re: My Rocco project
Posted: Thu Mar 05, 2015 11:20 am
by sc cal
Nice car ! The splitter fits nicely ! Where do you got it from?
Re: My Rocco project
Posted: Thu Mar 05, 2015 11:33 am
by Dave7692
The car looks great, do you know (roughly) how much you lowered it by, thats the sort of height I'd ideally like mine to sit at.