Scirocco Central

Carlo_96 wrote:Hi,

I have facelifted my 2010 Scirocco

I have rewired my taillights and they all work perfectly

However my headlights are not working completely as the sidelights won't come on event hough the fitting and the wires are the same? (They are not the Xenon LED Headlights)

I bought all the parts that I have fitted off a 2015 R Line model

Can someone help please would be much appreciated

davidscirocco wrote:+Niqlai do you have any quide on how to backup the BCM and restore them on the new BCM?

Niqlai wrote:

crossplane wrote:

Niqlai wrote:

I like the look of these, mine are a bit scratched too. Just curious though, would the wires be able to be hidden? I can see these on eBay for £75 (seems expensive) but the pictures arent clear enough to show how to hide the wires

YmoRtaL71 wrote:Excellent project congratulations, my scirocco is a 1.4 TSI SPORT and made the update to facelift the same as yours, but now one of the direction indicator leds gained water in and merged, so because of that is not working. Do you think that you can get me a chassis´s number of a R facelift for me to order the part in Vw? Just because here VW asked me for a chassis number and i do not have any. Did they asked for one as well?
Kind regards

lostpoint wrote:

Elek wrote:I am also looking for some help regarding the LED rear light upgrade, as I am making a 2014 R line into a 2015 (facelift)

I know i may need to change the BCM but i really really REALLY need some help with the wiring of the connectors, I have the new lights fitted. But i need to wire them in.

First of all, you have to order 2 x 1K8972928 sockets and 6 x 000979025E repair wires (each has 2 pins on its ends, so cut them in half to get 12 pins with wires on them).

Then, cut old sockets and assemble/wire new sockets observing the following scheme:

OLD -> NEW
1 -> 3 (the wire that previously was connected to pin 1 of old connector should now be connected to pin 3 of the new connector)
2 -> 7
3 -> 8
4 -> 5
5 -> 4
6 -> 6

After that, you can install your new rear lights. They will generally work, but slightly wrong (brake lights will light up dimmed when you'll turn sidelights on).
You will have to reconfigure your BCM using Vag Can Pro (VCP).
I can provide you with further data when you came to that step.

You don't need to replace BCM if you're not installing facelift headlights. Rear lights can be easily configured using VCP.

Gazzagood wrote:I did it no problems with vagcom, 2008 bcm facelift rear...

lostpoint wrote:also, I believe that all facelift lights, front and rear, are perfectly (or nearly perfectly maybe) compatible with pre-facelift BCM. tried playing with BCM outputs via VCP today, managed to make rear lights to work 100% properly (no always-on rear fogs or anything), managed front sidelights and DRL to work.

Niqlai wrote:Hello everyone

I'm not sure if okay but I'm from Danmark and as I'm always on the lookout for new inspiration and ideas to improve my scirocco I was thinking I would share my project with all of you.

My project started roughly 1 year ago and steadily increased to the point where I decided to do a complete R facelift on my car. My car is a 2.0 TDI from 2012 but a 2013 model.

List of parts:

2015 R steering wheel
2015 R front bumper
2015 R rear bumper
2015 speedometer
R side skirts
2015 R boot lid
2015 front LED xenon lights
2015 rear LED lights
2015 R leather seats
2015 R dashboard
2015 R turbo and oil gauge
R-line gear knob
19 ince R alloy wheels
R exhaust
2015 dynaudio set with dynaudio sub
Porsche Cayanne ZR18 front brakes and golf R32 breaks for the back - 345x30mm/288x15mm
Scirocco R doors

Many of you will "what the f*** .. It would be easier to buy a new car"
But I got it crazy cheap and it's more fun to build then buy and the new R will not be sold in Danmark

First I took 2015 the speedo and took it completely apart and removed the needles and the blue lights but also the outer glass to "lower" the dials to a more modern look with a great result.

Mostic wrote:

Niqlai wrote:Hello everyone

I'm not sure if okay but I'm from Danmark and as I'm always on the lookout for new inspiration and ideas to improve my scirocco I was thinking I would share my project with all of you.

My project started roughly 1 year ago and steadily increased to the point where I decided to do a complete R facelift on my car. My car is a 2.0 TDI from 2012 but a 2013 model.

List of parts:

2015 R steering wheel
2015 R front bumper
2015 R rear bumper
2015 speedometer
R side skirts
2015 R boot lid
2015 front LED xenon lights
2015 rear LED lights
2015 R leather seats
2015 R dashboard
2015 R turbo and oil gauge
R-line gear knob
19 ince R alloy wheels
R exhaust
2015 dynaudio set with dynaudio sub
Porsche Cayanne ZR18 front brakes and golf R32 breaks for the back - 345x30mm/288x15mm
Scirocco R doors

Many of you will "what the f*** .. It would be easier to buy a new car"
But I got it crazy cheap and it's more fun to build then buy and the new R will not be sold in Danmark

First I took 2015 the speedo and took it completely apart and removed the needles and the blue lights but also the outer glass to "lower" the dials to a more modern look with a great result.

Hi Mat, you built a very nice car, it is a continuous project as I can see
I agree "it's more fun to build than buy"