Scirocco Central

More...


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr


Untitled by Jimi Jokela, on Flickr

Hi,

I'm french so i'm sorry in advenced for my bad english language...

I have a Scirocco R from 2010 and i would like to install the new facelift xenon.

The Xenon work but the LED doesn't work...

I have a vagcom and follow this tuto http://forum.vw-scirocco.fr/viewtopic.php?f=41&t=16260" onclick="window.open(this.href);return false;.

Can you help me for connection please because it's not the same connection to standar scirocco... ?

Thanks

I installed the facelift xenons using the same tuto on a reg 1.4 tsi rocco and everything is working , i would double check your wires, module and coding

Yes but on the Scirocco R it's not the same connecting for the terminal. I do this on my old scirocco TDI 140 and everything was ok !

So if someone do this install on a Scirocco R please help me

Jimijokela can you help me please ?

I dont know how to on scirocco r.. But only difference on the r is the blinker in the headlight..

Oh sorry I thought you had a scirocco R... Yes it's not the same connecting...

Where can i buy rear facelift ?

UP

Is your headlight drl stil dimming when the dipped beams are on after joining pin 10 and 12 together?
And is the static cornering light controlled by the canbus? I see no pins in the headlight connector on pin 13.

That's stunning mate,




Prefer the new wheels they seem to suit it better

Roy_01 wrote:Is your headlight drl stil dimming when the dipped beams are on after joining pin 10 and 12 together?
And is the static cornering light controlled by the canbus? I see no pins in the headlight connector on pin 13.

You think i have to join the pin 10 to 12 ? I don't retry to connect the new headlight. I will try this this week i know.

Hey thinking about getting rs5 rotors too....i have the s5 rotors 19x9 currently. U reckon u can run them on kw dccs? Or u need bags?

Hi mate,
What is the part number for the facelift headlights?
I need it for LHD
Thx

hi Jimijokela

I'm going to mount 9x20 et 35 Rotor (no original)

I see you mountain 9x 20 et 26 (audi original) !!

I tried through Offset configurator but it seems impossible. Or you have to tilt the wheels

Now other other circles 20x 8,5 ET 44 !!

http://www.1010tires.com/Tools/Wheel-Offset-Calculator#" onclick="window.open(this.href);return false;

do you know anyone who mounts Rotor ET 35?

Sorry my english is not good.

irocman78 wrote:hi Jimijokela

I'm going to mount 9x20 et 35 Rotor (no original)

I see you mountain 9x 20 et 26 (audi original) !!

I tried through Offset configurator but it seems impossible. Or you have to tilt the wheels

Now other other circles 20x 8,5 ET 44 !!

http://www.1010tires.com/Tools/Wheel-Offset-Calculator#" onclick="window.open(this.href);return false;

do you know anyone who mounts Rotor ET 35?

Sorry my english is not good.

I have VMR710 ET35 18x8.5 and fitted without any problem

hi, Mostic ...yes, any problem for 8,5 ET 35.... but 9 ET 35 , who mounts other wheels ?

I would like to go to Rotor 9 x 20 ET 35 (not Et 26 - Jimijokela) deep concave but I think we are not in the fender

Jimijokela wrote:More...


Untitled by Jimi Jokela, on Flickr

Jimijokela,
you have a photo high 1 or 2 cm high from wheel arches ?