Page 6 of 6
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Wed Jul 22, 2020 7:53 pm
by Dreamer
Open Module 76 – Park Assist:
Electronics 1 | 76 - Park Assist
Then select Coding – 07 and enable Bit 4 of Byte 0 (with correct labels you can Enable "Optical Illustration active"):
Optical Illustration Active
Then goto Byte 2 and select the correct Model:
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Wed Jul 22, 2020 8:31 pm
by Marius336
First 3 Bytes in 5F ( Composition/Discover Media)
02 63 04
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Wed Jul 22, 2020 8:34 pm
by Dreamer
Dreamer wrote:Open Module 76 – Park Assist:
Electronics 1 | 76 - Park Assist
Then select Coding – 07 and enable Bit 4 of Byte 0 (with correct labels you can Enable "Optical Illustration active"):
Optical Illustration Active
Then goto Byte 2 and select the correct Model:
Ignore my advise. This was for RNS510 not the Discover Media. My bad
Sent from my iPhone using Tapatalk
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Thu Jul 23, 2020 8:51 am
by G60ffg
That’s great thanks, will give it a go. Thanks for the quick replies.
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Sat Dec 12, 2020 3:20 am
by blscargo
space walker
can you explain how to remove the component protection on a car that didn't have it from factory as i am striking out i have a vcds and am able to reset the radio through the address 5f but the dealer said odis 5f was grayed out
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Sun May 08, 2022 10:18 pm
by Crucifixzz
Mostic wrote:spacewalker wrote:blscargo wrote:Hi
I have a few questions about this process after you coded the radio in your friends caddy did the component protection ever come back and do you know how they coded it in you friends caddy was it coded to your sciroccos vin number and how much did it cost to activate everything?
if car belong to Component protection remove online - dealer can do that easy
if not (older cars) - CP can be remove permanent from radio
not a big deal now
Hi,
Could you explain more? I am asking about fitting it in the Scirocco.
Thx
I have a very good idea how CP can be removed. I will try and let you know
Re: Retrofit new MIB into older RNS/RCD car.
Posted: Mon Sep 26, 2022 8:20 pm
by maxime_mk3.5
Hello,
I also put a Discover Media PQ (to replace my RNS315) a few days ago but the microphone no longer works?
Is there an adaptation to be made on the original harness or simply coding?
J'ai la camera de recul (d'origine) pour RNS315, j'ai donc commander cette adaptateur :
Capture d’écran 2022-09-26 221756.png
Capture d’écran 2022-09-26 221856.png
But does anyone have a diagram to integrate the adapter correctly/cleanly... please?
Thanks
VW Scirocco facelift 2015