Rns510 version c need help programming with highline comput.

Technical discussion such as Bluetooth, Sat-Nav, iPods, tyres, brakes, all that kind of stuff.
Post Reply
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Rns510 version c need help programming with highline comput.

Post by chani1312 »

Hi guys I just replaced my rcd510 with rns510 version c . All works except sat nave directions don't come in high line and voice control doesn't work


I am based in Manchester anyone with vag com that could help me??? I am happy to pay thanks guys.
armjcb
Posts: 8
Joined: Sun Aug 15, 2010 10:48 am
I drive a: GT 2.0 TSI
In: Rising Blue
With a: DSG box

Re: Rns510 version c need help programming with highline com

Post by armjcb »

Phone Paul, 07984651560 he sorted mine out he is near MEN arena
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

cheers gonna text himwhat did he help you with? did you have the same issue with the rns510?
armjcb
Posts: 8
Joined: Sun Aug 15, 2010 10:48 am
I drive a: GT 2.0 TSI
In: Rising Blue
With a: DSG box

Re: Rns510 version c need help programming with highline com

Post by armjcb »

I had the same problem as you, the rns worked fine but I had no display on the mfd, mine was a version B that I had had fitted in my original Golf mk 6 so I saved it and put it into the Scirocco, now works just fine (£20 to sort it).
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

Cheers he sorted it. But I got the version c and the star button doesn't pick up my voice. He checked using VAG the microphone is connected. Anyone know why it wouldn't work ??
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Star button on version c rns510. Not working!

Post by chani1312 »

Hi people I managed to programme my rns510 with car the guy who did it said the microphone in built the car is enabled. But the star button when pressed doesn't pick up my voice at all. Keeps saying pardon pardon. And the voice control on my steering only works with bluetooth phone.

I really want this feature tovwork. Any ideas. If it's Vagcom I can tell the guy (Paul in Manchester) who did it for me to have a look. Thanks
User avatar
Shaun
Posts: 1731
Joined: Sat Jun 05, 2010 5:31 pm
I drive a: Scirocco R
In: Reflex Silver
With a: DSG box
Options: RNS510, DSG, leather, 19" Talladega's, Dynaudio, Bluetooth, front covered cup holder, rear cup holders, piano black cubby hole, Audi R8 oil cap
Location: Nottingham

Re: Star button on version c rns510. Not working!

Post by Shaun »

Did you have a microphone before the install ?, i.e bluetooth ?, did he programme new RNS for microphone ?, and after this did he reboot the unit
Image
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

Yeah he said the microphone was already enabled the other option was to disable it.

He reset it by holding arrow keys and eject and something else vi think

Still no look no voice is recognised

So annoying. What could it be
User avatar
Shaun
Posts: 1731
Joined: Sat Jun 05, 2010 5:31 pm
I drive a: Scirocco R
In: Reflex Silver
With a: DSG box
Options: RNS510, DSG, leather, 19" Talladega's, Dynaudio, Bluetooth, front covered cup holder, rear cup holders, piano black cubby hole, Audi R8 oil cap
Location: Nottingham

Re: Rns510 version c need help programming with highline com

Post by Shaun »

There are two parts to program, did he do both ?, he needs to click Microphone diagnostics active (tick in box), then he needs to deselect voice control inactive (no tick in box), think its byte 3 & 7 respectively in 37 navigation)

PS, i assume you mean the star button on the RNS510
Image
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

I'm not sure he did that. Is that all he does then enables the microphone again?
User avatar
Shaun
Posts: 1731
Joined: Sat Jun 05, 2010 5:31 pm
I drive a: Scirocco R
In: Reflex Silver
With a: DSG box
Options: RNS510, DSG, leather, 19" Talladega's, Dynaudio, Bluetooth, front covered cup holder, rear cup holders, piano black cubby hole, Audi R8 oil cap
Location: Nottingham

Re: Rns510 version c need help programming with highline com

Post by Shaun »

chani1312 wrote:I'm not sure he did that. Is that all he does then enables the microphone again?
yes, unless the steering wheel controls need doing also, after any changes he needs to reboot too, sometimes it doesnt take for no apparent reason too, so worth re doing
Image
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

My arresting controls work the volume everything but the microphone button on that is that meant to control the rns510 too would that be enabled if he does it this way?
User avatar
Shaun
Posts: 1731
Joined: Sat Jun 05, 2010 5:31 pm
I drive a: Scirocco R
In: Reflex Silver
With a: DSG box
Options: RNS510, DSG, leather, 19" Talladega's, Dynaudio, Bluetooth, front covered cup holder, rear cup holders, piano black cubby hole, Audi R8 oil cap
Location: Nottingham

Re: Rns510 version c need help programming with highline com

Post by Shaun »

chani1312 wrote:My arresting controls work the volume everything but the microphone button on that is that meant to control the rns510 too would that be enabled if he does it this way?
I am not sure on the Scirocco steering controls, but this is from the mk5 Golf instructions, it will give you an idea
If you car is fitted with the Multi Function Steering Wheel you can modify the mute button (* on the VW models) to activate the voice feature. This will not work if you have the Skoda car kit as this uses the mute buttone (*) for it’s voice dialling, no workaround has been found at this time so use the top right hand button adjacant to the dvd slot to active the feature.

Controller 16 – Steering

Select Coding 07 and you should see a 7 digit softcode which will be in the format 00xxxxx

The 4th digit from the right corresponds to the steering wheel variant. If you have a 4 spoke Multi Function Steering Wheel without the Cruise Control buttons it should be a 2. Change this to a 3 and that should convert your Mute button to activate the Voice Dialling.

Software version 0101 or lower

0?xxxxx: Vehicle Type

* 0 = Normal
* 1 = Special Purpose (e.g Taxi)

0x?xxxx: Transmission

* 0 = Manual Transmission
* 1 = Automatic Transmission

0xx?xxx: Steering Wheel

* 0 = Steering Wheel without Multifunction
* 1 = 3-Spoke Steering Wheel without Multifunction
* 2 = 3/4-Spoke Steering Wheel with Multifunction without Cruise & Voice Control
* 3 = 3/4-Spoke Steering Wheel with Multifunction with Cruise & Voice Control

0xxx?xx: Additional Equipment

* +1 = Tiptronic (Shift Paddels)

0xxxx?x: Board Computer / Cruise Control System (CCS)

* 0 = w/o Board Computer and w/o Cruise Control System (CCS)
* 1 = with Board Computer and w/o Cruise Control System (CCS)
* 2 = w/o Board Computer and with Cruise Control System (CCS)
* 4 = with Board Computer and with Cruise Control System (CCS)

0xxxxx?: Rear Wiper

* 1 = Rear Wiper not installed
* 2 = Rear Wiper installed

Software version 0110 or higher

0?xxxxx: Driver-Assistance-Systems

* 0 = Driver-Assistance-Systems not installed
* 0 = Message for Driver-Assistance-Systems active w/o Button
* 1 = Message for Driver-Assistance-Systems inactive w/o Button
* 2 = Message for Driver-Assistance-Systems active with Button
* 3 = Message for Driver-Assistance-Systems inactive with Button

0x?xxxx: Vehicle Type

* 0 = Normal
* 1 = Special Purpose with Multi-Function Control Module (Steer. Column. Contr. Mod. as Master)
* 2 = Special Purpose with Multi-Function Control Module (Multi-Function Contr. Mod. as Master)

0xx?xxx: Transmission

* 0 = Manual Transmission
* 1 = Automatic Transmission

0xxx?xx: Multi-Function Steering Wheel

* 0 = Multi-Function Steering Wheel not installed
* 5 = Multi-Function Steering Wheel w/o Tiptronic and w/o Push-To-Talk (PTT) installed
* 6 = Multi-Function Steering Wheel with Tiptronic and no Push-To-Talk (PTT) installed
* 7 = Multi-Function Steering Wheel w/o Tiptronic and with Push-To-Talk (PTT) installed
* 8 = Multi-Function Steering Wheel with Tiptronic and with Push-To-Talk (PTT) installed

0xxxx?x: Cruise Control System (CCS) and Adaptive Cruise Control (ACC)

* 0 = Cruise Control System (CCS) not installed
* 1 = Cruise Control System (CCS) with 6 Positions via separate Stalk installed
* 2 = Adaptive Cruise Control (ACC) with 6 Positions via separate Stalk installed
* 3 = Cruise Control System (CCS) with 4 Positions via Blinker Stallk installed
* 4 = Cruise Control System (CCS) via Multi-Function Steering Wheel installed
* 5 = Adaptive Cruise Control (ACC) via Multi-Function Steering Wheel installed

0xxxxx?: Rear Wiper and Board Computer

* 1 = Rear Wiper not installed / Board Computer via Wiper Stalk not installed
* 2 = Rear Wiper installed / Board Computer via Wiper Stalk not installed
* 3 = Rear Wiper not installed / Board Computer via Wiper Stalk verbaut
* 4 = Rear Wiper installed / Board Computer via Wiper Stalk installed
Image
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

I'm going to see the guy now he said he will try it. Could you pm me you number now in case I have any issues and I can put you through to the guy with VAG while he is doing it ???? Cheers
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

I just wentto see Paul with the VAG. Everything you said is done. But it still doesn't work. So frustrating. !!
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

Hi guys does anyone at all know anything in regards to why my star voice control button doesn't work. It doesn't pick up my voice I have built in bluetooth rsap. So it has a mic everything above thisthread has been mentioned but nothing does not pick up my voice ????
mortygttdi
Posts: 35
Joined: Wed Jan 27, 2010 1:58 am
I drive a: 2.0 TDI 140
With a: Manual box
Options: highline mfa+, rns510, vw premium bt, bi-xenons,

Re: Rns510 version c need help programming with highline com

Post by mortygttdi »

Does your bluetooth kit work? If so then all it means is that you need to run 2 more wires from the mic out on the RNS510 to the bluetooth module.

Although you have bluetooth and an RNS capable of voice control you don't automatically get it? You need the extra wires for the RNS, mic in and mic out.

Darren
chani1312
Posts: 183
Joined: Sun Dec 13, 2009 10:47 am
I drive a: Scirocco R
In: Deep Black
With a: DSG box
Options: bluetooth, dsg, 19" alloys, sat nav, black leathers
Location: Manchester

Re: Rns510 version c need help programming with highline com

Post by chani1312 »

Hi yeah I done that. But now the button on steering wheel doesn't control rns. Has a seperate phone command. How do I get the buttons to work in sync with the voice control?
Post Reply