Hopefully I will get to clean our scirocco for the first time since we bought it. Will be getting the full treatment.
Snowfoam clay clean polish wax, mostly using autofinesse products.
What's does everyone else use?
Bank holiday Monday clean
-
- Posts: 194
- Joined: Thu Jul 23, 2009 5:38 pm
- I drive a: GT 2.0 TSI
- In: Deep Black
- With a: DSG box
- Location: Aberdeen
Re: Bank holiday Monday clean
Bilthammer clay bar and shampoo, autofinesse tripple for polish then 2 coats of Zymol Glasur wax.
A few other options on polish in the shed and a few waxes of varying degreees of cost
A few other options on polish in the shed and a few waxes of varying degreees of cost
-
- Posts: 18
- Joined: Sat Apr 15, 2017 7:39 pm
- I drive a: GT 2.0 TDI 140/150
- In: Viper Green
- With a: Manual box
- Location: Hanpshire
Re: Bank holiday Monday clean
I clay bar'd dads hilux once and thought never again, but seems to work really nice on the viper green
But if no snow foam, just 2,3 bucket wash clay bar then polish
But if no snow foam, just 2,3 bucket wash clay bar then polish
-
- Posts: 1148
- Joined: Fri Sep 05, 2014 1:03 pm
- I drive a: GT 2.0 TDI 170/184
- In: Rising Blue
- With a: Manual box
- Location: Da Endz, Berkshire
Re: Bank holiday Monday clean
Pointless claying without first using an iron fallout and de-taring agent.
-
- Posts: 159
- Joined: Sat May 21, 2016 9:27 am
- I drive a: GT 2.0 TSI
- In: Deep Black
- With a: DSG box
Re: Bank holiday Monday clean
Whys that Jay? We are going to do a 1 step on toms car at the weekend. I've ran out of korrosol and my tar remover from when I did my car. How necessary is this? Will just a clay bar be good *enough* before the DA?xjay1337 wrote:Pointless claying without first using an iron fallout and de-taring agent.
-
- Posts: 1148
- Joined: Fri Sep 05, 2014 1:03 pm
- I drive a: GT 2.0 TDI 170/184
- In: Rising Blue
- With a: Manual box
- Location: Da Endz, Berkshire
Re: Bank holiday Monday clean
The problem with just using a clay bar is that you want to try and take as much off as possible in a contactless manner.Harry_VW wrote:Whys that Jay? We are going to do a 1 step on toms car at the weekend. I've ran out of korrosol and my tar remover from when I did my car. How necessary is this? Will just a clay bar be good *enough* before the DA?xjay1337 wrote:Pointless claying without first using an iron fallout and de-taring agent.
If you can order some Iron X and Tar Remover today you should be able to get next day delivery.
Not the end of the world if you can't, but it is defo recommended.