Scirocco Central

Xenon headlight Scirocco R
Right traffic
1K8 941 753 D - left 358.19 EUR
1k8 941 754 D - right - 358.19 EUR

Left-hand traffic
1K8 941 753 E - left 358.19 EUR
1k8 941 754 E - right - 358.19 EUR

-------------------------

Lamp for turn signal Scirocco R
N 102 564 04 - turn signal silver glass - PY21W 12V 21W - 11.54 EUR
Silver looks optically and shines yellow only if the filament shines.

---------------------------

LED day driving light Scirocco R
1K8 941 055 - left 105.91 EUR
1K8 941 056 - right - 105.91 EUR
additionally:
1J0 973 803 - flat contact housings with contact bolting device black - 1.96 EUR
N 104 159 03 - fillister-head screw 4x12 - 0.10 EUR

-----------------------------

Tail lamp Scirocco R + R-LINE
1K8 945 095 J - left (kirschrot darkened) - 105.91 EUR
1K8 945 096 J - right (kirschrot darkened) - 105.91 EUR
additionally:
1K8 945 105 A reflectors left (darkened) - 11.84 EUR
1K8 945 106 A reflectors right (darkened) - 11.84 EUR

------------------------------

Steering wheels
5K0 419 091 AA ASZ - multi-function steering wheel leather Scirocco R - 418.88 EUR
5K0 419 091 T ASZ - multi-function steering wheel leather with Tiptronic Scirocco R - 492.66 EUR
1K8 419 091 P G0L - steering wheel leather R-LINE - 358.19 EUR
1K8 419 091 S G0L - steering wheel leather with Tiptronic R-LINE - 445.06 EUR
1K8 419 091 Q G0L - multi-function steering wheel leather R-LINE - 418.88 EUR
1K8 419 091 R G0L - multi-fnctn steering wheel leather with Tiptronic R-LINE - 492.66 EUR
5K0 419 685 N POP - steering wheel clip chrome gloss/black Scirocco R - 19.04 EUR
1K8 419 685 B POP - steering wheel clip chrome gloss/black R-LINE - 19.04 EUR

-----------------------------

Shift lever
5K0 711 113 K YMD - shift levers including leather switching bag Scirocco R - 164.22 EUR

----------------------------

Exhaust system Scirocco R
1K8 253 209 D - Vorschalldämpfer
1K8 253 609 P - Nachschalldämpfer
1K0 253 141 T - double clip 60 mm - 15.59 EUR (2x)
1K0 253 144 AP - owners - 20.83 EUR
1K0 253 147 D - guard ring - 3.51 EUR (2x)
N 019 530 8 - hexagonal flange screw - 1.55 EUR (2x)
1K0 253 144 owners in front - 11.84 EUR
N 904 718 02 - hexagonal screw - 0.42 EUR (2x)
8D0 253 147 E - guard ring - 3.51 EUR
In addition, the entire negative pressure system is still outstanding for the controlling of the waste gas valve.

------------------------------------

Brake assembly 345x30 mm VA Scirocco R
8P0 615 123 A brake caliper housing left 315.35 EUR
8P0 615 124 A brake caliper housings right - 315.35 EUR
8E0 615 125 C - Bremsträger - 153.51 EUR (2x)
1K0 615 269 B - retaining spring black - 0.95 EUR (2x)
1K0 615 301 M - brake disk ventilates 345x30 mm - 157.08 EUR (2x)
N 106 483 01 - countersunk screw - 0.19 EUR (2x)
1K0 615 311 C - cover for brake disk left 6.55 EUR
1K0 615 312 C - cover for brake disk right - 6.55 EUR
N 910 733 01 - cheese head screw - 0.20 EUR (6x)
N 909 488 02 - serrating screw - 2.26 EUR (4x)
8J0 698 151 F - brake lining set - 141.61 EUR
1K0 611 841 A owners for brake hose left 0.95 EUR
1K0 611 842 A owners for brake hose right - 0.95 EUR
N 907 186 02 - hexagonal screw - 0.49 EUR (2x)
8P0 615 409 A erase-suppl.-yielded - 15.65 EUR (2x)
N 106 476 02 - cheese head screw - 0.52 EUR (2x)
N 104 048 05 - wearing part - 0.06 EUR (2x)

----------------------------------------

Brake assembly 310x22 mm ha of Scirocco R
8J0 615 423 E - brake caliper housings black left 235.03 EUR
8J0 615 424 E - brake caliper housings black right - 235.03 EUR
1K0 615 425 R - Bremsträger with guide pins black left 112.22 EUR
1K0 615 426 G - Bremsträger with guide pins black right - 112.22 EUR
WHT 003 250 - hexagonal screw - 0.74 EUR (4x)
8P0 615 231 A shim - 4.70 EUR (4x)
1K0 615 601 N - brake disk ventilates 310x22 mm - 79.14 EUR (2x)
1Q0 615 611 B - cover for brake disk left 16.30 EUR
1Q0 615 612 B - cover for brake disk right - 16.30 EUR
1K0 698 451 K - brake lining set - 83.18 EUR
N 910 733 01 - cheese head screw - 0.20 EUR (8x)
N 106 483 01 - countersunk screw - 0.19 EUR (2x)
N 910 815 01 - cheese head screw - 2.38 EUR (4x)
1K0 615 295 - feather/spring left 1.79 EUR
1K0 615 296 - feather/spring right - 1.79 EUR

--------------------------------

Body

Radiator grille Scirocco R
1K8 853 653 B 9B9 - radiator grille satinschwarz - 71.64 EUR
1K8 853 761 C 041 - Zierrahmen black - 71.64 EUR
1K8 853 679 A FXC - signature chromfarben/black " R" - 13.45 EUR

---------------------------------

Front Bumper - Scirocco R
1K8 805 903 C 9B9 - spoilers satinschwarz
1K8 805 733 - holders for spoilers left
1K8 805 734 - holders for spoilers right
1K8 805 915 B - supporting piece spoiler
1K8 807 221 K GRU - bumper cover priming
1K8 807 241 B 9B9 - cover for towing eye for vehicles with headlight washer
1K8 807 941 B - guidance frameworks for vehicles with headlight washer left
1K8 807 942 B - guidance frameworks for vehicles with headlight washer right
1K8 853 677 A 041 - ventilation screens black centre
1K8 854 661 041 - ventilation screens black left
1K8 854 662 041 - air circulation lattices black right

--------------------------

Front Bumper - R-LINE
1K8 805 903 D 9B9 - spoilers satinschwarz
1K8 807 221 H GRU - bumper cover priming
1K8 807 221 J GRU - bumper cover priming
1K8 807 941 - guidance frameworks for vehicles with headlight washer left
1K8 807 942 - guidance frameworks for vehicles with headlight washer right

-------------------------

Rear Bumper Scirocco R + R-LINE
1K8 807 417 K GRU - bumper cover priming
1K8 807 417 L GRU - bumper cover priming for vehicles with park assistance
1K8 807 568 041 - employment down black Scirocco R
1K8 807 568 A 9B9 - employment down black R-LINE
1K8 801 261 - adapters bumpers left
1K8 801 262 - adapters bumpers right

--------------------------

Rear flap Scirocco R + R-LINE
1K8 827 933 C GRU – Dark Edge spoiler priming
1K8 805 945 E 041 - disk spoilers black left
1K8 805 946 E of 041 - disk spoilers black right
1K8 853 675 K FXC - signature chromfarben/black "R"
5K0 853 688 A PON - plaque chrome gloss/black "R-Line"

--------------------------

Seitenschweller (Side Bodykit??) Scirocco R + R-LINE
1K8 853 859 B GRU - side member lining priming left
1K8 853 860 B GRU - side member lining priming right
1K8 853 543 - retaining strip left
1K8 853 544 - retaining strip right
1K8 854 939 C GRU - cover for door priming left
1K8 854 940 C GRU - cover for door priming right
1K8 853 537 C HE1 - entrance border chrome brushed/shining on the left and on the right 1K8 853 537 D HM2 - entrance border chrome brushed/matte-blue on left and on the right

----------------------------

Interior
1K8 868 055 A YHX - cover for tightening grasp titanium black left 15.71 EUR
1K8 868 056 A YHX - cover for tightening grasp titanium black right - 15.71 EUR
1K1 863 011 R G0N - set of floor mats in front and in the back black/artgrey - 98.18 EUR

----------------------------

The instrument panel dials are not available yet.

----------------------------
I've only loosely translated it and also be aware of some is left hand drive or right hand drive cars.
C.

Any idea on prices on the body parts? I can see them for lots of the parts but not the bumpers, spoiler, etc. (I am looking on my phone though so may just be missing them because of that!).

Deacon

Not complete yet. Depends on the parts updates being release, bit.... by... bit.....

C.

Might get a half decent gearshift knob for the manual then

I was wondering if i order the r-line multi-function steering wheel with paddleshifts,would it work in my car? Because mine is the mk5 steering wheel and since this is the mk6 steering wheel how would it work?? Also is there a way to change the speedometer and the ac unit to the mk6 generation ones?.....cheers

Im interested in the shocks and spring set up for the R, be nice to know if KW/H&R lowering springs from normal Rocco will fit the R

More info on the LEDS....

LED day driving light Scirocco R
1K8 941 055 - left - £75.67
1K8 941 056 - right - £75.67



Still unsure on exactly what a retro fit will require.. i.e. where the indicator will go, how to turn off power to the old sidelights cable.

I have read a while back that the "R"'s LED DRL's are a little shorter width wise. ie. a gap will be apparent on the inboard end in the standard indicator/sidelight mounting point. An the other thing is the ETKA above is suggesting a mounting bolt securing it from the back, not from underneath. (That could be sorte by some sort of backing plate through which the bolt passes and the plate rest on the internal bumper structure.)

C.

hello, I want to know if the LED light mounted on my2009?

The indicators are mounted in the xenon lamps on the R, so unless you fancy going out and buying some new lamps plus the cost of the drl's I think you may be out of luck.
Just go and buy an R! Lol

RW1 wrote:An the other thing is the ETKA above is suggesting a mounting bolt securing it from the back, not from underneath. (That could be sorte by some sort of backing plate through which the bolt passes and the plate rest on the internal bumper structure.)

Yeah I noticed that too, as I had removed my unit the other night and the screw was from the front.

spamdog wrote:The indicators are mounted in the xenon lamps on the R, so unless you fancy going out and buying some new lamps plus the cost of the drl's I think you may be out of luck.
Just go and buy an R! Lol

Yeah the chap in the parts dept is still trying to identify where the indicator lamp is on the R, if its in the main headlights unit then obviously I'm not going to bother chasing this up, as otherwise I would have gone for it

I really want a Roc R but just can't afford it lol

what?! Its so easy...blinker goes to the original DRL light, DRL becomes the Led one...

stdci wrote:what?! Its so easy...blinker goes to the original DRL light, DRL becomes the Led one...

So for clarity, you've put the "R"'s LED DRLs in a standard Scirocco bumper exactly as the standard sidelight / indicator unit fits, secured the same way with a securing screw at the front underneath? And you've put the turn signal indication where?

C.

He put the blinker where the standard DRL is on the normal Sciroccos( with xenon). Am I wrong?

Guys I haven't done anything yet apart from taking the original one out and having a look behind it. The 'R' parts are currently on back order from the factory and could take weeks to arrive for dealers to order them.

stdci wrote:what?! Its so easy...blinker goes to the original DRL light, DRL becomes the Led one...

Its a completely different connection, the original drl has a W5W 501 plug on the end of it, the new R DRLs use a 3pin connection, so it's not so easy as cables will have to be modified.
The original blinker is or I hope is on a 3pin connection (once removing the blinker holder), therefore I would take that off and possible use that but it would require VAGCOM recoding.

But since your saying its so easy please help me as I am being a complete tw*t if it really is that easy - photos would help as both me and the guys in parts haven't worked out where the indicator bulb is in the 'R'

Thanks in advance

I have the R bumper, R LED wont fit the original bumper.

stdci wrote:I have the R bumper, R LED wont fit the original bumper.

Cool, where did you put the indicator bulb? Picture will be useful, thanks

as i said...at the original DRL´s place...

stdci wrote:as i said...at the original DRL´s place...

Can you just expand on this a little....

How are the new DRLs being powered?
How is the indicator being powered, and did you get a new bulb, as the old bulb is clear and needs the orange reflector - the new drl unit won't have an orange reflector built in it, so did you get an orange bulb?
Was there any VAGCOM recoding required?


If you could answer those questions that would be of great help.

I´ll try my best...

You´ll need a vulgar blinker lamp like the passat or touareg bi-xenon headlights have (osram diadem for exº), you have to conect the original blinker wires to the old DRL (made by professionals). Its easier like this...turn DRL Off with vag com (it wont ask for the lamp), R LED lights will work everytime you turn parking lights on, you have to get wires conected to it (also by a professional). All conections are different but an electrician expert in can bus modules can do it.