Page 3 of 10

Re: Marius Rocco

Posted: Thu Dec 06, 2018 8:26 pm
by davidscirocco
i have check to see what requirements i need to make the high beam assist and i dont have the camera back of my on my center mirror. so even if i wanted i need to retrofit that camera...

Re: Marius Rocco

Posted: Thu Dec 06, 2018 8:56 pm
by Roy_01
Oh stupid i forgot, then you are right uncheck it.

Re: Marius Rocco

Posted: Thu Dec 06, 2018 9:08 pm
by davidscirocco
:D :yes:

Re: Marius Rocco

Posted: Thu Dec 06, 2018 9:49 pm
by Marius336
there is a high beam assist without camera, you know?

you dont need to do the Passat camera to have high beam, there is a light diod one

Re: Marius Rocco

Posted: Fri Dec 07, 2018 4:53 am
by davidscirocco
I did not now that. Is it easy to retrofit?

Re: Marius Rocco

Posted: Fri Dec 07, 2018 8:58 am
by Roy_01
You mean the light assist rear view mirror?

Re: Marius Rocco

Posted: Fri Dec 07, 2018 11:59 pm
by Marius336
yes ,

1k8857511b

there is a kufatec harnes for that, only work MY +2010 with BCM
Image

Re: Marius Rocco

Posted: Sat Dec 08, 2018 12:24 pm
by davidscirocco
i have seen a video on youtube someone retrofitting this. i think you have to change the 6 pin connector to 8 pin and have to connect canbus cable from the mirror to the canbus AFS module and then there are some coding and thats it. correct me if im wrong

Re: Marius Rocco

Posted: Sat Dec 08, 2018 4:19 pm
by Roy_01
Just connect to the can gateway, but the rest is right easy swap.

Re: Marius Rocco

Posted: Sat Dec 08, 2018 4:26 pm
by davidscirocco
Will think about it. Im going to change the headliner so maybe ill just pass the cable and when i need to change it will be an easy change

Re: Marius Rocco

Posted: Sat Dec 08, 2018 9:59 pm
by Marius336
yes, change 6 pin plug from mirror to 8 pin

Re: Marius Rocco

Posted: Thu Jan 03, 2019 8:53 am
by Niqlai
Hello mate.

Have you bought the car with side assist, lane assist, park assist and so one or have you done that your self ?

Re: Marius Rocco

Posted: Fri Jan 04, 2019 12:35 am
by Marius336
all by my self, these things you cant get from VW for Scirocco, only in Passat.

Re: Marius Rocco

Posted: Fri Jan 04, 2019 8:04 am
by Niqlai
I will sent you a PM

Re: Marius Rocco

Posted: Sat Jan 26, 2019 6:16 pm
by Steve_MCG
Hi Marius, I seen your Retrofit of MIB2 to your Scirocco, did your unit have the CP removal done on the motherboard? Is the canbus gateway necessary for retrofit? I have been looking to do this retrofit for some time and have not found a lot of information on how to do this with Sciroccos. Any help appreciated and you car looks awesome!

Re: Marius Rocco

Posted: Sun Jan 27, 2019 3:11 pm
by Marius336
i got a new DM and Tim from VCDSWorkx did the Component Protection direct to my 3D Cluster. So my Component Protektion is aktiv like in Real Facelift Scirocco.
Gateway is not realy nessesary, but i recomand to et a gateway that support 5F

Re: Marius Rocco

Posted: Wed Feb 13, 2019 7:29 pm
by Marius336
Image

Image

Image

Image

Image

Image

Image

Image

For more information look at Lane & high beam assist & fatigue detection installed

Re: Marius Rocco

Posted: Wed Feb 13, 2019 8:18 pm
by Roy_01
Very nice job Marius, if VW sees this they hire you directly :)

Re: Marius Rocco

Posted: Wed Feb 13, 2019 8:29 pm
by Marius336
i study car engineering in Wolfsburg :D

Re: Marius Rocco

Posted: Thu Feb 14, 2019 8:13 am
by Roy_01
Then it makes sense haha.