Scirocco Central

davidscirocco wrote:did you connect the cables from kufatec to the BCM? A7 A8 C48 C49? if so before you connect them did you check your BCM if there are pins in the numbers A7 A8 C48 C49?

Tu come.li hai collegati?? A te funziona ??

La mia bcm e una 086q quindi nn ho collegato nessun pin perche mi funziona tutto senza avarie.dici che sia quello il problema? Hai lo schema della bcm ??

I connected pins 8 and 10 together with the positive drl .. the 12 nn was connected. but it does not turn on. can I connect pin 12 to the low beam pin?

so how do I connect them ?? pin 8 to pin 12 of the lighthouse and pin 10 I take it to the positive bumper ???,

my current configuration and pin 8 10 and 12 together connected to the positive drl. when I put the value 2 the headlight led turns off. I do not know why

I tried but my led headlamp when the brightness goes down goes out. I ask for help thanks

the side light and pin 10 in the right lighthouse? I connect pin 10 to pin 12 and then I take it to the bumper drl ??? now connected pin 8 10 12 to the positive bumper.

what do you mean by side light ??? where is the 12 pin ???

Roy_01 wrote:You have to connect drl to pin 8 and 10 and side light to pin 12.
Then see 1 post above. Drl dimming value set to 2.
I think only A44 and c26 because the drl can just run on full brightness.

so my configuration is wrong ?? pin 8 10 and 12 together with the positive drl I do not understand

hello my configuration and right pin 8 10 12 connected to the positive drl. it works all but I would like the drl to drop in intensity when I turn on the low beam as I can do.? just change the intensity with vag can pro a44 c26 and c4 a26? and set to 2?

I connected pins 8 10 and 12 to the positive drl .. and pin 8 to pin 11 .. everything works .. only the LED flashes when the engine is running. why ?

hi guys I have a scirocco of 2013 with halogen headlights .. my bcm and a final 086q .. I have already bought the headlights and wiring kufatec .. I read that you have to change it .. connecting pin 8 to pin 11 and making a bridge from pin 8 to pin 12 and right? I'm interested in having only the bix...