Scirocco Central

Hi, Ive recently noticed my key won't unlock/lock the car if I stand over 1-2 metres away. the range used to be really good I used to be able to unlock it quite far but now its annoying because I need to stand really close to lock and unlock. does anyone know where the receiver is for the key fob ? ...

only rear I am going to install front soon ! I have the sensors in bumper just need to buy the wiring loom, do you know where I can buy from ? thanks

Marius could you please tell me where to wire up the parking sensor switch please.

thank you <3

Bumper, hood and everything can stay. But You need to do something for Indicator, because the Pre Facelift R have it inside the Xenon and Facelift have indicator seperate. thanks for the heads up! but could you elaborate a little? based on your reply, here is what i gathered: Pre FL R Xenon headlig...

very nice I have very smilier setup to you Marius !
when you press the button for parking does it open your camera view or Parking sensor only ?

I ordered the switch do you remember what pin in bcm you connect it to ? thanks

Marius, what are you doing to the instruments in this picture ?? I have retrofitted from PFL 2011 R I have these in my car the turbo doesn't show 100% correct as it should on idle mine is 0 and goes to 1.5 bar max on full throttle did you modify yours ?

Hi, its a big job , from a preface lift scirocco r you have to rewire the existing harness to be suitable for facelift lights. I had to also install level sensor as mine didn't work with facelift headlights and was different. make custom adapter for afs and buy afs from facelift scirocco r so no cod...

buy one removed from a scirocco r and its plug play,

thank you I will try this on weekend

yeah I'm even more confused now , my shutter works as it is no change required from preface lift bi xenon.. I also have the led square working pin 8 ( I wired straight to pin 10 or 12 (the led strip on headlights ) and its on all the time when the led is on ) im just stuck now I don't know what to d...

I still made not much progress I spliced pin 13 into pin 4 and corner lights error were gone but still afs bend light error and fault code won't delete, what do you mean by cornering light on facelift working via can bus ? thanks hope to finish this soon the light error on dash is annoying would lik...

Did you find anything yet? Notice that the facelift AFS only uses the rear level sensor and different sensor type. Also if you had pre facelift xenon you have 1 front sensor and 1 rear the facelift only needs the rear sensor and is different type. If you have dcc you have 2 front sensors and 1 rear...

yes yes i changed the afs got one removed from facelift rocco and made adapter for prefacelift to facelift , projector lights move up and down and vcds lets me access afs so i think its okay .. problem is i still have fault code for the level sensor that broke and has been replaced … will try to adj...

yes 100% i tried that sensor when mine broke and the connectors are different , you can see from the before pic its same as new one with green plastic, i tried this one with black plastic as it was a cheaper replacement but the connectors are different doest fit . . mine is 2013 r line high spec fro...

Sorry this is the replacement one I installed the other pic is the old broken one


Sent from my iPhone using Tapatalk

This is how it’s mounted now .... Isit correct or incorrect ? Does not move when push with fingers ..
thank you


Sent from my iPhone using Tapatalk

Hi Roy thanks for your reply, ! i had replaced the sensor with one from allegro, same part number as old one .. fitted it and cannot clear the fault code seems like something is off .. cannot perform basic settings for afs either but i believe its because of this sensor having issues, my car is RHD ...

David & Roy, I still cannot figure out how to get rid of the error codes , basically i get error code (no left cornering light & no right cornering light ) and afs no bend lighting is available… , i tried to do basic settings with vcds but never works.. says error accured… have any of you 2 ...

thank you so much mate ! you the best ! i will try tomorrow morning thank you so much

ROY 01 IS THERE ANY CHANCE YOU CAN HELP ME ? you are very good ! thank you for the guide , so my facelift xenon is now almost all workings , Projectors led strip , led square , etc all working i made afs adapter and it works ! projectors move up and down which is good but not left & right I'm tr...